DYS Samguk Series Wei D2207 2300KV BLDC Motor

The DYS D2207 2300KV motor is optimized for 4S to 6S LiPo batteries. Using a 4S pack provides efficient cruising and longer flight times, while a 6S setup unlocks maximum power and throttle response for aggressive racing and freestyle maneuvers. Always pair with a suitably rated ESC (e.g., 35A+ per motor).

This motor uses the standard 16mm x 19mm M3 mounting hole pattern, compatible with most 5-inch FPV drone frames. You should use M3 screws of appropriate length to secure the motor to the frame's arm, typically between 4mm and 6mm long, depending on your frame's arm thickness.

Yes, the motor includes a prop nut. It features a standard CW (Clockwise) thread, which is the most common direction for FPV drone motors. This means you tighten the nut by turning it clockwise. Ensure your propellers are compatible with CW-threaded nuts.

While its 2300KV rating and torque-optimized 2207 stator provide strong performance, it is primarily designed for dynamic flight. For efficient long-range cruising, a lower KV motor (e.g., 1700-1900KV) might be better. However, for aggressive cinematic flying or heavy-lift 5-inch builds, this motor offers excellent power and control.