Walksnail Patch Antenna V2 for Avatar HD Goggles X
Walksnail Patch Antenna V2 for Avatar HD Goggles X - Image 2
SKU: DRFC-2326
📋 GST Invoice Available

Walksnail Patch Antenna V2 for Avatar HD Goggles X

₹2,959.00 (Inclusive of all taxes)
Out of Stock

The Walksnail Patch Antenna V2 is a dedicated, high-gain antenna mask upgrade for the Avatar HD Goggles X, engineered to provide superior signal reception and stability across the 5.6–6.0GHz band with LHCP polarization.

Features

  • Integrated dual-antenna mask designed exclusively for Avatar HD Goggles X
  • High 6.7dBi gain with a wide 127° beam-width for stable, long-range reception
  • LHCP polarization and 97% efficiency minimize multipath interference
  • Lightweight construction at 37g ensures comfort during extended FPV sessions
  • Right-angle SMA-RP connectors with rubber handwheels for secure, durable installation

Out of stock

Description

The Walksnail Patch Antenna V2 is a purpose-built upgrade for the Avatar HD Goggles X, integrating a dual-antenna mask that replaces the stock assembly. Its design leverages a professional RF substrate to deliver a high 6.7dBi gain and a broad 127° beam-width, significantly enhancing signal capture and reducing dropouts in challenging RF environments.

Engineered for the 5.6–6.0GHz Walksnail/HD Zero band, this antenna features LHCP (Left-Hand Circular Polarization) to combat signal degradation caused by reflections, paired with a high 97% efficiency rating and a VSWR below 1.4 for optimal power transfer. The right-angle SMA-RP connectors simplify cable routing and reduce strain, while the lightweight 37g build maintains goggle balance and pilot comfort.

Key Features

  • Integrated dual-antenna mask for seamless installation on Avatar HD Goggles X
  • High-performance patch antenna with 6.7dBi gain and 127° beam-width
  • Optimized for 5600–6000MHz frequency range with LHCP polarization
  • Superior RF efficiency of 97% and low VSWR (<1.4) for maximum signal integrity
  • Durable right-angle SMA-RP connectors with rubberized handwheels
  • Lightweight, rigid construction (37g) for enhanced comfort and durability
  • Professional RF substrate ensures stable performance and reduced interference

Applications

  • Direct replacement and performance upgrade for the stock antenna mask on Avatar HD Goggles X
  • Enhancing signal reception and penetration for Walksnail Avatar HD digital FPV systems
  • Improving video link stability for long-range cinematic and freestyle FPV flights
  • Reducing video breakup in high-interference urban or multi-pilot racing environments

Technical Specifications

Item TypePatch Antenna
Gain6.7dBi
VSWR<1.4
Connector TypeSMA-RP (Right-Angle)
PolarizationLHCP (Left-Hand Circular Polarization)
Efficiency97%
Frequency Range5600–6000MHz
Beam Width127°
Length146 mm
Width35 mm
Weight37 g

Frequently Asked Questions

Is this antenna compatible with other FPV goggles besides the Avatar HD Goggles X?

No, the Walksnail Patch Antenna V2 is designed as an integrated mask replacement specifically for the Avatar HD Goggles X. Its mounting and connector placement are tailored to that goggle model and it is not directly compatible with other goggle systems without significant modification.

What is the advantage of LHCP polarization for FPV?

LHCP (Left-Hand Circular Polarization) helps mitigate multipath interference, which is common when signals reflect off surfaces like buildings or the ground. Using LHCP on both the transmitter and receiver antennas can significantly reduce video breakup and improve signal clarity compared to linear polarization in complex environments.

How do I install the Patch Antenna V2 on my Avatar HD Goggles X?

Installation is straightforward: remove the stock antenna mask from your goggles. The Patch Antenna V2 mounts directly in its place. Connect the right-angle SMA-RP connectors from the antenna to the corresponding RX ports on your goggles, ensuring they are hand-tightened securely using the rubber handwheels.

What frequency range does this antenna cover?

This antenna is optimized for the 5.6–6.0GHz frequency band, which is the standard operating range for Walksnail Avatar HD digital video systems. It provides peak performance and efficiency within this specific spectrum.

Package Includes

  • 1 x Walksnail Patch Antenna V2 for Avatar HD Goggles X

Additional Information

Weight 0.037 kg
Dimensions 14.6 × 3.5 cm

Related Products

Image
Out of Stock

TBS Triumph-Stub SMA (RHCP 2pcs)

3,829.00
Learn More
Image
Out of Stock

CaddxFPV Redbird Antenna Avatar Goggles Antenna (2 pcs)

1,639.00
Learn More
Image
Out of Stock

TrueRC X²-AIR 5.8 MK II LHCP RP-SMA Male FPV Antenna

6,489.00
Learn More
Image
Out of Stock

TBS Triumph RP-SMA LHCP Antenna - 2-Pack

303.00
Learn More
Image
Out of Stock

TBS Triumph SMA (RHCP 2pcs)

3,899.00
Learn More
Image
Out of Stock

Foxeer Lollipop 4 RPSMA FPV Antenna - Black

1,729.00
Learn More
Image
Out of Stock

Foxeer Pagoda Pro SMA FPV Antenna - Black

1,009.00
Learn More
Image
Out of Stock

Generic 5.8G 2dBi Antenna for FPV Transmitter - Black

429.00
Learn More
Image
Out of Stock

TBS Triumph-Stub RPSMA (RHCP 2pcs)

3,829.00
Learn More
Image
Out of Stock

SpeedyBee 5.8 GHz Antenna V2 2PCS-MMCX 90 Degree - Yellow and Black

4,289.00
Learn More
Image
Out of Stock

RunCam 5.8 GHz Antenna - MMCX-L - 1PCS

809.00
Learn More
Image
Out of Stock

TBS Triumph-Stub RPSMA (LHCP 2pcs) - Stub Antenna

359.00
Learn More