Holybro Power Distribution Board (PDB) with XT30 Pre-soldered
Holybro Power Distribution Board (PDB) with XT30 Pre-soldered - Image 2
Holybro Power Distribution Board (PDB) with XT30 Pre-soldered - Image 3
SKU: DRFC-1783
📋 GST Invoice Available

Holybro Power Distribution Board (PDB) with XT30 Pre-soldered

₹1,259.00 (Inclusive of all taxes)
Out of Stock

The Holybro Power Distribution Board (PDB) is engineered for high-current applications, featuring pre-soldered XT60 connectors for main power and an optional XT30 for ESC/motor connections. Designed for compatibility with PM02 and PM02D power modules, it supports continuous 60A loads with 120A peak bursts for under 60 seconds.

Features

  • High-Current Power Distribution: Rated for 60A continuous current with a 120A maximum burst capacity for durations under 60 seconds.
  • Pre-Soldered Connectors: Includes XT60 connectors for battery and power module input, plus an optional XT30 output for ESC and motor power on compatible frames like the X500 V2.
  • Direct Module Compatibility: Specifically designed for seamless integration with Holybro PM02 and PM02D series power modules.
  • Standardized Mounting Pattern: Features 45x45mm mounting holes for straightforward installation into compatible multirotor frames.
  • Robust PCB Construction: Utilizes a durable, high-quality printed circuit board with thick copper traces for reliable power delivery and minimal voltage drop.

Out of stock

Description

This Holybro Power Distribution Board serves as a dedicated, high-efficiency hub for managing electrical power in advanced UAV and multirotor builds. Its design prioritizes clean power distribution from the main battery to critical flight components, minimizing wiring complexity and potential points of failure. The board’s electrical layout is optimized to handle the substantial current demands of modern propulsion systems.

Constructed with a robust PCB featuring enhanced copper weight, the PDB ensures stable voltage under high load conditions, which is critical for maintaining consistent ESC and motor performance. The inclusion of pre-soldered high-current connectors (XT60 and XT30) not only simplifies the assembly process but also guarantees secure, low-resistance solder joints. This board is an integral component for builders seeking a reliable and tidy power solution for frames compatible with the 45x45mm mounting standard.

Key Features

  • High-Current Rated Design: Engineered for 60A continuous operation with a peak capability of 120A, supporting powerful multirotor setups.
  • Integrated Connector Solution: Features factory-soldered XT60 input connectors and an optional XT30 output, reducing build time and improving connection reliability.
  • Optimized for Holybro Ecosystem: Specifically tailored for use with Holybro PM02 and PM02D power modules, ensuring plug-and-play compatibility.
  • Universal 45x45mm Mounting: Adheres to a common mounting hole pattern for easy installation in a wide range of frame designs.
  • Durable PCB Construction: Built with quality materials and finishes to withstand vibration and provide long-term operational stability.
  • Simplified Wiring Layout: Centralizes power distribution, reducing cable clutter and improving overall system maintenance and safety.

Applications

  • Power distribution hub for Holybro X500 V2 and similar large-scale quadcopter or hexacopter frames.
  • Central power board for custom UAV builds requiring a clean, high-current distribution solution with 45x45mm mounting.
  • Integration into aerial photography or mapping platforms utilizing Holybro PM02/PM02D power modules for regulated voltage output.
  • Foundation for heavy-lift or cargo drone electrical systems demanding robust, burst-capable power routing.

Technical Specifications

Item TypePower Distribution Board (PDB)
BrandHolybro
Rated Continuous Current60A
Maximum Burst Current120A (for <60 seconds)
Mounting Hole Pattern45x45mm
Pre-Soldered Input ConnectorsXT60 (for Battery & Power Module)
Optional Pre-Soldered Output ConnectorXT30 (for ESC & Motor on X500 V2)
Primary CompatibilityHolybro PM02, PM02D Power Modules

Frequently Asked Questions

What is the maximum continuous and burst current this Holybro PDB can handle?

This Power Distribution Board is rated for a continuous current of 60 Amps. It can handle a maximum burst current of 120 Amps for short durations, specifically for less than 60 seconds. This design accommodates the high initial thrust demands of multirotor aircraft without overheating.

Which connectors are pre-soldered onto the board, and what are they for?

The board comes with XT60 connectors pre-soldered for the main battery input and connection to a compatible power module (like the Holybro PM02). It also includes an optional XT30 connector pre-soldered, which is intended to provide power to the Electronic Speed Controllers (ESCs) and motors on specific frames such as the Holybro X500 V2.

What is the mounting hole pattern, and which power modules is it compatible with?

The PDB features a standard 45x45mm mounting hole pattern, making it easy to install in many frames that support this spacing. It is specifically designed for direct compatibility with Holybro's PM02 and PM02D series power modules, ensuring a streamlined and secure integration into builds using those components.

Package Includes

  • 1 x Holybro Power Distribution Board (PDB) with XT30 Pre-soldered

Additional Information

Weight 0.025 kg
Dimensions 8 × 8 × 3 cm

Related Products

Image
Out of Stock

Holybro Digital Air Speed Sensor Board Only

6,559.00
Learn More
Image
Out of Stock

Holybro Micro M10 GPS w/ Case for PX4 ArduPilot INAV

4,419.00
Learn More
Image
Out of Stock

Holybro Micro M9N GPS with IST8310 Compass

7,289.00
Learn More
Image
Out of Stock

Holybro Fixed Carbon Fiber GPS Mount 29mm

1,549.00
Learn More
Image
Out of Stock

Holybro UBEC 12A 3-14S Adjustable Voltage Regulator

4,649.00
Learn More
Image
Out of Stock

Holybro Digital Air Speed Sensor (MS5525DSO) with PT40 Pitot Tube

10,039.00
Learn More
Image
Out of Stock

Holybro X500 V2 500mm Carbon Fiber Drone Frame Kit

17,149.00
Learn More
Image
Out of Stock

Holybro Digital Air Speed Pitot Tube

3,039.00
Learn More
Image
Out of Stock

Holybro PM03D Power Module

5,559.00
Learn More
Image
Out of Stock

Holybro DroneCAN M9N GPS Module

12,079.00
Learn More
Image
Out of Stock

Holybro H-RTK ZED-F9P Rover - CAN Protocol RTK GNSS Module

51,959.00
Learn More
Image
Out of Stock

Holybro CH7609A RTK GNSS Antenna (4-Band)

7,729.00
Learn More