SKU: DRFC-0889
📋 GST Invoice Available

Pixhawk 2.4.8 Flight Controller Combo Kit w/ M10 GPS

₹15,599.00 (Inclusive of all taxes)
Out of Stock

This comprehensive kit provides a Pixhawk 2.4.8 autopilot, an advanced M10 GPS module, and a power module, offering a complete solution for building fixed-wing, multi-rotor, or robotic platforms. It integrates essential navigation and power management components for reliable autonomous flight.

Features

  • 32-bit ARM Cortex M4 Pixhawk 2.4.8 Flight Controller for robust performance.
  • u-blox NEO-M10 GPS module with multi-GNSS support and integrated compass for precise positioning.
  • Redundant power input and failsafe co-processor for enhanced flight safety.
  • Includes PPM encoder, power module, and anti-vibration set for comprehensive integration.
  • Supports various robotic platforms including fixed-wing, multi-rotors, and ground vehicles.

Out of stock

Description

The Pixhawk 2.4.8 Full Combo Kit delivers a complete, high-performance autopilot solution suitable for a wide array of robotic platforms, including fixed-wing aircraft, multi-rotors, helicopters, and ground vehicles. This kit consolidates essential flight control, navigation, and power management components, providing a robust foundation for advanced autonomous applications.

At its core, the Pixhawk PX4 2.4.8 Flight Controller features a powerful 32-bit ARM Cortex M4 core (STM32F427) running the NuttX RTOS, equipped with a comprehensive sensor suite including multiple gyroscopes, accelerometers, magnetometers, and a barometer. Its architecture incorporates redundant power inputs and a 32-bit STM32F103 failsafe co-processor, ensuring system reliability and safety during critical operations. Extensive bus interfaces (UART, I2C, SPI, CAN) allow for broad peripheral connectivity.

Complementing the flight controller is a new-generation u-blox NEO-M10 GPS module, which boasts low power consumption and high positioning accuracy. It supports a full range of GNSS constellations including GPS/QZSS L1 C/A, GLONASS L1OF, BeiDou B1, SBAS, and Galileo E1B/C. Features such as AssistNow GNSS support, an onboard compass, and active anti-jamming technology contribute to exceptional navigation performance. The kit is rounded out with a robust power module supporting up to 6S batteries and essential accessories like an anti-vibration set and GPS folding base.

Key Features

  • Advanced 32-bit ARM CortexM4 high-performance processor (STM32F427) with FPU.
  • Integrated backup power and failsafe controller for robust system redundancy.
  • Comprehensive sensor suite: L3GD20H gyroscope, X4HBA accelerometer/magnetometer, MPU 6000, and MS5607 barometer.
  • Extensive I/O: 5x UART, 2x CAN, Spektrum DSM/DSM2/DSM-X, Futaba S.BUS, PPM sum signal.
  • u-blox NEO-M10 GPS module supporting multiple GNSS constellations (GPS, GLONASS, BeiDou, Galileo) with onboard compass.
  • AssistNow GNSS support and active anti-jamming for enhanced GPS performance.
  • APM 2.5.2/2.6/2.8 Pixhawk Power Module V1.0 with 90A current sensing and 5.3V/3A output, supporting 6S batteries.
  • Includes PPM encoder for traditional RC receiver compatibility and anti-vibration set.

Applications

  • FPV fixed-wing aircraft
  • Multi-rotor drones (quadcopters, hexacopters)
  • Autonomous mapping and survey UAVs
  • Robotics platforms (cars, boats)
  • Research and development UAVs

Technical Specifications

Flight Controller Processor32bit STM32F427 Cortex M4 core with FPU (168 MHz, 128KB RAM, 2MB Flash)
Failsafe Co-processor32-bit STM32F103
GyroscopeST Micro L3GD20H (16-bit), Invensense MPU 6000 (3-axis)
Accelerometer/MagnetometerST Micro X4HBA 303H (14-bit)
BarometerMEAS MS5607
PWM/Servo Output14 channels
Serial Ports (UART)5x (2x with HW flow control)
CAN Ports2x
PPM Encoder Input Channels8
PPM Encoder OutputPPM SUM × 1 / MUX × 1
M10 GPS Supported GNSSGPS/QZSS L1, GLONASS L1, BeiDou B1, SBAS L1, Galileo E1
M10 GPS CompassOnboard
M10 GPS OscillatorTCXO, Crystal
M10 GPS Anti-jammingActive CW detection, onboard SAW filter
Power Module Max Input Voltage28V
Power Module Max Current Sensing90A
Power Module Output Voltage/Current5.3V @ 3A Max
Power Module Battery SupportUp to 6S LiPo
GPS Folding Base Rod Diameter4mm
GPS Folding Base Rod Length14 cm
GPS Folding Base GPS Plate Diameter40 mm
GPS Folding Base Plate Diameter35 mm
GPS Folding Base Mounting Hole Spacing16-35mm
GPS Folding Base Weight20g

Frequently Asked Questions

What firmware does the Pixhawk 2.4.8 support and how is it configured?

The Pixhawk 2.4.8 supports ArduPilot and PX4 firmware, running on the NuttX RTOS. Firmware can be flashed using Mission Planner or QGroundControl. Configuration involves calibrating sensors, setting flight modes, and defining failsafe parameters through these ground station software platforms to ensure optimal performance and safety for your UAV.

What are the input voltage limitations for the Pixhawk 2.4.8 and included power module?

The included power module supports up to 6S LiPo batteries, with a maximum input voltage of 28V. It provides a stable 5.3V at 3A to power the Pixhawk flight controller. Ensure your battery voltage does not exceed 28V to prevent damage to the power module and connected components.

How does the M10 GPS module enhance navigation accuracy for this kit?

The u-blox M10 GPS module significantly improves navigation accuracy by supporting multiple satellite constellations including GPS, GLONASS, BeiDou, and Galileo. This multi-GNSS capability, combined with AssistNow features and active anti-jamming technology, provides more robust and precise positioning data, crucial for reliable autonomous flight missions.

Can this Pixhawk kit be used with various types of RC receivers?

Yes, the Pixhawk 2.4.8 offers broad compatibility with various RC receivers. It supports Spektrum DSM/DSM2/DSM-X® Satellite, Futaba S.BUS®, and PPM sum signal inputs. The included PPM Encoder Module further allows compatibility with traditional PWM receivers by converting multiple channels into a single PPM stream for the flight controller.

What is the purpose of the failsafe co-processor in the Pixhawk 2.4.8?

The 32-bit STM32F103 failsafe co-processor acts as a critical safety feature. In the event of a primary controller failure, it takes over essential functions, ensuring the drone can perform predetermined failsafe procedures, such as returning home or landing safely. This redundancy enhances overall flight reliability and minimizes risks during critical operations.

Package Includes

  • 1 x Pixhawk V2.4.8 Flight board with Original Shell
  • 1 x 4GB TF card (IO firmware pre-written)
  • 3 x Connecting Cables
  • 1 x Pixhawk PPM Encoder Module
  • 1 x JR plug 10P input end cable (100mm)
  • 1 x JR plug 4P output end cable (100mm)
  • 1 x Glass Fiber Flight Controller Anti-vibration/Shock absorber Set
  • 1 x M10 GPS Module with translucent Shell
  • 2 x cables (APM/PIX)
  • 1 x GPS Folding Base Antenna set
  • 1 x APM 2.5.2/2.6/2.8 Pixhawk Power Module
  • 1 x I2C Splitter with Cable
  • 1 x OSD OLED Display

Additional Information

Dimensions 15 × 10 × 6 cm