SKU: IOWC-1674
📋 GST Invoice Available

Macnman MAC32WBLE5 LoRaWAN + BLE 5.0 Dual Wireless Module

₹1,699.00 (Inclusive of all taxes)
Out of Stock

The Macnman MAC32WBLE5 is a dual wireless IoT module integrating a LoRaWAN transceiver and Bluetooth Low Energy 5.0. Powered by dedicated STM32WL (LoRa) and Nordic Semiconductor nRF52 (BLE) MCUs, it supports global ISM bands for long-range, low-power sensor node deployments.

Features

  • Dual wireless architecture with dedicated STM32WL for LoRaWAN and Nordic Semiconductor nRF52 for BLE 5.0.
  • Supports global LoRaWAN frequency bands: IN865, EU868, US915, and AU915.
  • High RF output power up to 22 dBm for a line-of-sight range exceeding 8 km.
  • Ultra-low power operation with sleep mode current consumption under 3 µA for extended battery life.
  • Integrated security features including AES-128 encryption and support for BLE Over-the-Air (OTA) firmware updates.

Out of stock

Description

The Macnman MAC32WBLE5 is a sophisticated dual-radio module designed for demanding IoT edge deployments requiring both long-range, wide-area connectivity and short-range device configuration. It employs a dedicated microcontroller architecture, with an STM32WL SoC handling the LoRa/FSK modulation and a separate Nordic Semiconductor nRF52 managing the Bluetooth Low Energy 5.0 stack. This separation ensures optimal performance and power management for each wireless protocol.

Engineered for global deployment, the module operates on key LoRaWAN ISM bands, providing flexibility for regional network integration. Its high transmit power of up to 22 dBm and excellent receiver sensitivity down to -148 dBm guarantee robust communication links in challenging environments. The module’s ultra-low power design, featuring a deep sleep current of less than 3 µA, is critical for battery-powered applications in remote monitoring, smart agriculture, and industrial telemetry, enabling multi-year operation on a single charge.

Key Features

  • Dual-core wireless design: STM32WL for LoRa and nRF52 for BLE 5.0.
  • Global multi-band support for seamless LoRaWAN deployment worldwide.
  • High-performance RF front-end with up to 22 dBm output power.
  • Extremely low sleep current (<3 µA) maximizes battery life in field applications.
  • Hardware-based AES-128 encryption for secure data transmission.
  • Bluetooth Low Energy interface enables easy local configuration, debugging, and OTA updates.
  • Compact form factor (24.88mm x 19mm) for space-constrained designs.
  • Supports multiple modulation schemes: LoRa, FSK, GFSK, and OOK.

Applications

  • Remote environmental monitoring stations for soil moisture, air quality, and weather data.
  • Industrial IoT (IIoT) for asset tracking, tank level monitoring, and predictive maintenance telemetry.
  • Smart agriculture systems for irrigation control, livestock tracking, and crop health sensing.
  • Smart city infrastructure including smart parking, waste management, and utility metering.
  • Asset tracking and logistics where long-range LoRaWAN reporting is combined with BLE for local beaconing or configuration.

Technical Specifications

Item TypeLoRaWAN+Ble Module
Model No.MAC32WBLE5
Main Control (MCU)STM32WL (LoRa), Nordic Semiconductor nRF52 (BLE)
Frequency BandIN865, EU868, US915, AU915
RF Output PowerUp to 22 dBm (~150 mW)
SecurityAES-128 Encryption, CRC
Modulation SystemLoRa, FSK, GFSK, OOK
Wireless TechnologyLoRaWAN, Bluetooth Low Energy 5.0
Operating Range>8 km (Line-of-Sight)
Dimensions (L x W)24.88 mm x 19 mm
Weight3 g

Frequently Asked Questions

How do I configure the MAC32WBLE5 module for a specific LoRaWAN frequency band?

The module supports bands like EU868 or US915 via AT commands or direct register configuration of the STM32WL's SX126x radio driver. You must set the correct center frequency, spreading factor, and bandwidth parameters through your embedded firmware, typically using libraries like LoRaMAC-node or Arduino-LoRa, before joining a LoRaWAN network server like The Things Network.

What is the procedure for performing a BLE Over-the-Air (OTA) firmware update?

Connect to the module's BLE service from a smartphone app or PC tool like nRF Connect. The nRF52 MCU runs a DFU (Device Firmware Update) service. You upload the new firmware binary file via this BLE connection. The bootloader verifies and writes the update to flash, after which the module resets. Ensure stable power during the process to prevent corruption.

What are the power supply requirements and how do I achieve the ultra-low 3 µA sleep current?

Supply the module with 3.3V. To achieve the specified deep sleep current, your firmware must correctly put both the STM32WL and nRF52 MCUs into their lowest-power shutdown or standby modes. This involves disabling peripherals, configuring GPIOs, and using the specific low-power API calls provided by the STM32CubeWL and nRF5 SDKs before entering sleep.

Package Includes

  • 1 x Macnman MAC32WBLE5 LoRaWAN+Ble Module

Additional Information

Weight 0.003 kg
Dimensions 2.488 × 1.9 cm