SKU: IOWC-1079
📋 GST Invoice Available

RAKwireless RAK5802 RS485 Module w/ TP8485E Chip

₹749.00 (Inclusive of all taxes)
Out of Stock

The RAKwireless RAK5802 is a WisBlock interface module providing a robust RS485 to UART bridge with Modbus protocol support, designed for modular IoT systems. It connects directly to WisBlock Core processors like the RAK4631 for low-power industrial telemetry and automation applications.

Features

  • Industrial RS485 to UART converter based on the 3PEAK TP8485E transceiver chip for reliable long-distance serial communication.
  • Seamless plug-and-play compatibility with the WisBlock ecosystem, connecting directly to cores like the RAK4631 (BLE) or RAK3172 (LoRa).
  • Features automatic TX/RX direction detection, eliminating the need for manual DE (Driver Enable) signal control.
  • Integrates 18kV HBM ESD protection (IEC61000-4-2 compliant) for robust operation in electrically noisy industrial environments.
  • Includes an onboard I2C expansion port for connecting additional sensors, maximizing the modularity of your WisBlock setup.

Out of stock

Description

The RAK5802 RS485 Module is a compact, energy-efficient interface board engineered for the RAKwireless WisBlock modular IoT platform. It translates UART signals from a WisBlock Core module into robust, differential RS485 signals, enabling reliable communication over long distances in noisy industrial settings. The module leverages the 3PEAK TP8485E transceiver, which supports automatic driver/receiver direction control, simplifying firmware development by removing the need for a dedicated DE pin.

Built for low-power IoT deployments, the module draws power directly from the WisBlock baseboard and can be put into a power-off state by the core MCU to conserve energy. Its design includes in-field quick-connect terminals for easy wiring of the RS485 bus (A, B, GND) and features substantial ESD protection to safeguard against electrostatic discharge events common in industrial installations. This makes it an ideal building block for creating modular Modbus RTU gateways, industrial sensor nodes, and building automation systems.

Key Features

  • Industrial-grade RS485 interface with support for the Modbus RTU protocol.
  • Automatic TX/RX direction detection via the TP8485E chip eliminates DE pin management.
  • Direct plug-and-play compatibility with the WisBlock modular connector system.
  • Robust 18kV HBM ESD protection on the RS485 lines per IEC61000-4-2 standard.
  • Onboard I2C interface for expanding system capabilities with additional sensor modules.
  • Ultra-compact form factor (35mm x 25mm) designed for the WisBlock footprint.
  • Supports networks of up to 16 RS485 slave devices on a single bus.
  • Low-power operation with ability to be powered down by the WisBlock Core MCU.

Applications

  • Industrial IoT (IIoT) sensor data acquisition and Modbus RTU gateways.
  • Building automation systems for HVAC, lighting, and energy monitoring.
  • Environmental monitoring stations with RS485-based sensor arrays.
  • Modular telemetry units for agricultural and irrigation control systems.
  • Prototyping and deploying custom industrial control nodes within the WisBlock ecosystem.

Technical Specifications

Interface / ProtocolRS485, UART, I2C, Modbus RTU
Core Transceiver IC3PEAK TP8485E
CompatibilityWisBlock Core Modules (e.g., RAK4631, RAK3172)
Supply Voltage3.3V (from WisBlock baseboard)
ESD Protection18kV HBM (IEC61000-4-2)
Max Nodes SupportedUp to 16 RS485 slave devices
Operating Temperature-40°C to +85°C
Dimensions (L x W)35 mm x 25 mm

Frequently Asked Questions

How do I connect this RS485 module to my WisBlock system?

Simply plug the RAK5802 module into any IO slot on your WisBlock Base board. Connect your RS485 bus wires (A, B, GND) to the onboard screw terminals. The UART communication with your WisBlock Core (like RAK4631) is established automatically via the WisBlock connector, requiring no additional wiring for basic operation.

Does this module require a Driver Enable (DE) pin to be controlled in software?

No. The integrated 3PEAK TP8485E transceiver features automatic direction detection, which handles the switching between transmit and receive modes autonomously. This eliminates the need for a dedicated DE control pin and simplifies your firmware code, as you can treat the interface as a standard UART.

What is the maximum number of devices I can have on the RS485 bus with this module?

The RAK5802 module supports standard RS485 networks and is typically rated for up to 16 slave devices on a single bus segment. The actual maximum can be influenced by cable quality, baud rate, and termination. For larger networks, consider using repeaters or segmenting the bus as per standard RS485 design practices.

Can I use this module with Arduino or platforms other than WisBlock?

While designed for the WisBlock connector, you can use it standalone by providing 3.3V power and connecting to its UART_TX, UART_RX, and GND pins via the connector pads. However, you will lose the plug-and-play convenience and integrated power management offered by the WisBlock ecosystem. You would need to manually handle voltage level translation if your MCU uses 5V logic.

Package Includes

  • 1 x RAKwireless RAK5802 RS485 Interface Module

Additional Information

Weight 0.04 kg
Dimensions 3.5 × 2.5 cm