Arducam B0483 1/1.32" 64MP Auto Focus Camera Module for Raspberry Pi

Ensure you are running a recent Raspberry Pi OS with libcamera support. Connect the 15-pin to 22-pin FPC cable from the camera to the Raspberry Pi's camera port. No additional drivers are typically needed; you can use standard libcamera commands like 'libcamera-still' or 'libcamera-vid' to capture images and video. The module is detected automatically by the system when connected correctly.

Auto-focus mode allows the camera to automatically adjust focus on the subject. Manual focus gives you full control over the focus distance via software commands. Continuous focus mode keeps adjusting focus dynamically to track moving subjects. You can switch between these modes using libcamera's control interface or compatible Python libraries to suit static scenes, precise macro shots, or video with motion.

Yes, the camera supports exposure times up to 900 seconds at its maximum 64MP resolution. This is ideal for astrophotography, low-light landscapes, or capturing light trails. Use libcamera commands with the '--shutter' parameter to set the exposure time in microseconds. Ensure the Raspberry Pi is stable and the scene is dark to avoid overexposure during these ultra-long captures.