G-NiceRF RF2401Pro nRF24L01+ FCC/IC Certified 2.4GHz Transceiver
G-NiceRF RF2401Pro nRF24L01+ FCC/IC Certified 2.4GHz Transceiver - Image 2
G-NiceRF RF2401Pro nRF24L01+ FCC/IC Certified 2.4GHz Transceiver - Image 3
SKU: IOWC-0082
📋 GST Invoice Available

G-NiceRF RF2401Pro nRF24L01+ FCC/IC Certified 2.4GHz Transceiver

₹579.00 (Inclusive of all taxes)
Out of Stock

The G-NiceRF RF2401Pro is a certified 2.4GHz wireless transceiver module based on the Nordic Semiconductor nRF24L01+ chip, offering SPI-based communication for remote control, smart home, and industrial IoT applications with ultra-low power consumption.

Features

  • FCC & IC certified Nordic Semiconductor nRF24L01+ module ensures regulatory compliance for commercial product integration.
  • High sensitivity of -94 dBm at 250 Kbps provides robust, long-range communication in the 2.4GHz ISM band.
  • Ultra-low power operation with sleep and wake functions extends battery life in remote sensors and controls.
  • SPI interface and configurable 250 Kbps, 1 Mbps, or 2 Mbps data rates offer flexible integration with MCUs.
  • Wide 1.9–3.6V operating voltage and -40°C to +85°C temperature range ensure reliability in harsh environments.

Out of stock

Description

The G-NiceRF RF2401Pro is a professional-grade 2.4GHz wireless transceiver module built around the proven Nordic Semiconductor Semiconductor nRF24L01+ system-on-chip. It provides a complete, certified RF solution for developers requiring reliable short-range communication. The module operates in the global 2.4GHz ISM band, utilizing GFSK modulation across 126 selectable channels for interference-resistant data links.

Engineered for low-power IoT deployments, the module integrates an internal voltage regulator and supports advanced power management modes, including deep sleep and timed wake-up, making it ideal for battery-powered endpoints. Its SPI interface allows for straightforward connection to a host microcontroller for configuring data rates, channel selection, and packet handling. The robust design, coupled with international FCC and IC certifications, makes the RF2401Pro a ready-to-integrate component for volume production and commercial wireless systems.

Key Features

  • Certified RF module based on the original Nordic Semiconductor nRF24L01+ chip for guaranteed performance and regulatory compliance (FCC ID, IC ID).
  • High-reliability GFSK modulation with 126 channels minimizes interference in crowded 2.4GHz environments.
  • Ultra-low power architecture features deep sleep and wake-up functions for multi-year battery operation in remote nodes.
  • Integrated voltage regulator supports a wide 1.9V to 3.6V supply range, compatible with various battery types and MCU voltages.
  • SPI digital interface simplifies firmware development and integration with Arduino, STM32, ESP32, and other popular platforms.
  • Robust operating temperature range from -40°C to +85°C ensures stable performance in industrial and outdoor applications.
  • Supports frequency hopping and enhanced packet communication (32-byte FIFO) for secure and reliable data transmission.

Applications

  • Wireless remote controls for consumer electronics, toys, and industrial equipment.
  • Smart home automation sensors and actuators for lighting, security, and environmental monitoring.
  • Tire Pressure Monitoring Systems (TPMS) and automotive telemetry.
  • Wireless health monitoring devices and wearable sensor tags.
  • Asset tracking, inventory management, and RFID tag readers.
  • Low-power mesh networks for industrial sensor telemetry and IIoT.

Technical Specifications

Chip/SoCNordic Semiconductor nRF24L01+
Wireless Protocol2.4GHz Proprietary RF
Frequency Range2400-2480 MHz
RF Output Power0 dBm (1 mW)
Receiver Sensitivity-94 dBm @ 250 Kbps
Data Rates250 Kbps, 1 Mbps, 2 Mbps
ModulationGFSK
Channels126
Supply Voltage1.9 – 3.6 V DC
InterfaceSPI
Operating Temperature-40°C to +85°C
Dimensions22.61 mm (L) x 12.89 mm (W)

Frequently Asked Questions

How do I interface the RF2401Pro module with an Arduino or ESP32?

Connect the module's SPI pins (MOSI, MISO, SCK, CSN) to corresponding GPIOs on your microcontroller. Use the 3.3V power pin for VCC and a common ground. Popular libraries like 'RF24' for Arduino IDE or PlatformIO handle the low-level communication, allowing you to configure channels, data rates, and send/receive packets with simple API calls. Ensure your host MCU operates at 3.3V logic levels.

What is the typical current consumption during transmission and in sleep mode?

During active transmission at 0dBm output power, the module draws approximately 11.3mA. In receive mode, consumption is around 12.3mA. The deep sleep (power down) mode reduces current to less than 900nA, which is critical for battery-powered applications. Utilize the module's built-in power management functions via SPI commands to cycle between active and sleep states, dramatically extending operational life.

Can I use this certified module for a commercial product sold in the USA and Canada?

Yes, the RF2401Pro holds FCC (United States) and IC (Canada) certifications. This means the module has been tested and approved for electromagnetic compliance and intentional radiator standards. When integrating it into your end product, you must follow the certification guidelines, which typically involve using the module as instructed without modification and applying the correct labeling on your final device's enclosure.

What is the maximum reliable outdoor range for this module?

The reliable range depends on antenna selection, data rate, and environment. With a simple 1/4-wave wire antenna and 0dBm output, expect 50-100 meters in open space at 2Mbps. Using an external 2.4GHz antenna with gain (e.g., 3dBi) and lowering the data rate to 250Kbps can extend the line-of-sight range to several hundred meters. Obstacles like walls significantly reduce range, so site testing is recommended.

Package Includes

  • 1 x G-NiceRF RF2401Pro nRF24L01+ 2.4GHz Transceiver Module

Additional Information

Weight 0.003 kg
Dimensions 2.261 × 1.289 cm

Related Products

Image
Out of Stock

Elecrow CAN-BUS Shield V1.5 for Arduino

769.00
Learn More
Image
Out of Stock

Arduino Ethernet Shield 2 (A000024) with W5500 & PoE

3,039.00
Learn More
Image
Out of Stock

1.8-inch SPI 128x160 TFT LCD Module for Arduino

299.00
Learn More
Image
Out of Stock

MuseLAB PMOD-SDCARD Board for iCESugar FPGA

259.00
Learn More
Image
Out of Stock

ST BlueNRG-MS Bluetooth 4.1 LE Daughter Board STEVAL-IDB005V1D

6,069.00
Learn More
Image
Out of Stock

W5500 Ethernet Shield for Arduino

4,559.00
Learn More
Image
Out of Stock

DFRobot W5200 Ethernet Shield for Arduino UNO/Mega

2,089.00
Learn More
Image
Out of Stock

STM32F103CBT6 Maple Mini Development Board

591.00
Learn More
Image
Out of Stock

STMicroelectronics X-NUCLEO-EEPRMA2 EEPROM Expansion

1,789.00
Learn More
Image
Out of Stock

Infineon Technologies BGT60UTR11AIPTOBO1 60GHz Radar Dev Board

31,919.00
Learn More
Image
Out of Stock

CH376S USB Module U Disk Read/Write for MCUs

209.00
Learn More
Image
Out of Stock

Microchip Technology OLED1 Xplained Pro OLED Display (128x32 SPI)

5,649.00
Learn More