Pro-Range Standard Water Washable Resin 1kg Skin

Optimal exposure times vary by printer and layer height, typically 2-4 seconds for mono LCD screens and 6-10 seconds for RGB. Ensure your build plate is level, and the resin is at room temperature (20-25°C). Always perform an exposure calibration test for best results with your specific machine model.

After printing, gently remove excess resin by rinsing the part with tap water for 2-5 minutes. Use a soft brush for intricate details if needed. Once clean, fully dry the part before post-curing it under a UV lamp (405nm) or direct sunlight until completely hardened and no longer tacky.

Yes, this resin is specifically formulated to provide ABS-like mechanical properties, including high tensile strength (29MPa) and good impact resistance (15-16 J/m). This makes it well-suited for durable functional prototypes, engineering parts, and components requiring assembly and mechanical resilience.

Always use appropriate personal protective equipment, including gloves and safety glasses, when handling liquid resin. Work in a well-ventilated area to minimize fume exposure. Avoid skin and eye contact. Store the resin in its original opaque bottle, away from direct sunlight and heat, at room temperature (15-30°C).