SUNLU Water-Wash ABS Resin Black 1kg

For optimal results, ensure your printer is leveled and print at room temperature (20-30°C). Exposure times typically range from 2-4 seconds for LCD/DLP printers, depending on layer height and printer power. Always perform calibration prints to fine-tune settings for your specific machine and environmental conditions.

After printing, rinse parts thoroughly with water to remove uncured resin. For best results, use ultrasonic cleaning or a soft brush. Ensure all residue is removed before completely drying the parts. Post-cure under a 365-405nm UV light for 2-5 minutes per side, depending on part thickness and UV intensity, to achieve maximum hardness.

While SUNLU Water-Wash ABS Resin has low odor, using a well-ventilated area or an enclosure with active air filtration is always recommended for safety and to maintain consistent environmental temperatures during printing. This helps to reduce any potential fumes and ensures stable print conditions for quality output.

It is generally not recommended to mix SUNLU Water-Wash ABS Resin with other types of resins, especially those from different manufacturers or with different chemical compositions. Mixing can lead to unpredictable curing properties, reduced mechanical strength, and print failures. Always use resins as intended for optimal performance.