SUNLU PLA+ 2.0 Black 1.75mm 1kg FDM Filament

For optimal results with SUNLU PLA+ 2.0, a nozzle temperature between 205–245°C is recommended, with a heated bed set to 50–60°C. Adjusting within this range can help fine-tune layer adhesion and surface finish based on your specific 3D printer and desired print quality. Lower speeds may allow for cooler temperatures.

To ensure excellent bed adhesion, use a heated print bed at 50-60°C. A clean PEI sheet, glass bed with glue stick, or blue painter's tape can further improve stick. Proper bed leveling is critical. For larger prints, a brim or raft can help prevent warping and ensure the first layer adheres reliably to the print surface.

While PLA+ is less hygroscopic than some other materials, drying is still crucial for optimal print quality. If you notice signs like stringing, bubbling, or inconsistent extrusion, dry the filament at 50-55°C for 4-6 hours in a filament dryer or a convection oven. This maintains material integrity and print consistency.

SUNLU PLA+ 2.0 offers significant improvements in mechanical properties over standard PLA. It boasts enhanced tensile strength, flexural strength, and notably higher impact resistance (10 ± 3 kJ/m²). This makes it a more durable and robust material suitable for functional parts that require better resilience against stress and impact, expanding its application range.