Hanyoung Nux PB-T10RP PNP Through Beam Photo Sensor - 10m Range, IP65

In Light-ON mode, the PNP output transistor turns ON (sources voltage) when the receiver detects the light beam. In Dark-ON mode, the output turns ON when the beam is blocked. This switchable logic allows you to match the sensor's output state to your control system's requirements for object presence or absence.

While the exact voltage range isn't listed in the provided specs, industrial PNP photoelectric sensors like this typically operate on a 12-24V DC supply. You must consult the official Hanyoung Nux datasheet for the PB-T10RP to confirm the permissible supply voltage range, brown-out protection, and wiring details to ensure safe and correct operation.

The IP65 rating protects against dust and low-pressure water jets, making it suitable for some outdoor or washdown environments. However, its specified ambient light immunity (up to 11,000 lux sunlight) must be considered. Direct, intense sunlight on the lens could still cause interference. For full outdoor exposure, a sensor with a higher IP rating (e.g., IP67/IP69K) and specialized optical filters might be more appropriate.

For maximum 10m range, ensure a clear, unobstructed line of sight. Precisely align the optical axes of the separate transmitter (PB-TR10RP) and receiver (PB-TL10R) units. Many models have alignment indicators (like a beam received LED) on the receiver. Secure both units on stable mounts to prevent misalignment from vibration, and perform a functional test by passing the target object through the beam.