eSUN PLA+ Fire Engine Red Refill Filament 1.75mm 1kg

For best results, use an extruder temperature between 210-230°C, with 215°C often being ideal. A heated bed temperature of 45-60°C is recommended to ensure strong adhesion and prevent warping, though it can print on unheated beds with proper surface preparation.

The spool-less refill design significantly reduces plastic waste and transportation costs. For printing, ensure you use a reusable master spool or a proper holder to prevent tangles and ensure smooth feeding. Store in a sealed bag with desiccant to maintain filament quality.

eSUN PLA+ offers enhanced mechanical properties over standard PLA, including significantly higher tensile and flexural strength, as well as improved toughness and layer adhesion. This results in more durable and robust prints, expanding its application range for functional prototypes and components.

While PLA+ is less hygroscopic than some other materials, proper drying is still recommended for optimal print quality, especially if exposed to humidity. Dry at 50-55°C for 4-6 hours to remove moisture, which helps prevent stringing, bubbling, and poor layer adhesion.