eSUN PETG+ 1.75mm Translucent Orange 1kg Filament

For optimal results with eSUN PETG+ filament, a printing temperature between 220-260°C is generally recommended. The exact temperature can vary slightly depending on your specific 3D printer and nozzle type. Always perform a temperature tower test to fine-tune settings for the best layer adhesion and surface finish.

Yes, a heated bed is highly recommended for eSUN PETG+ to ensure good first layer adhesion and prevent warping. A bed temperature typically between 70-80°C works well. Using an adhesive like a glue stick or PEI sheet can further improve adhesion. Ensure the bed is level for consistent results.

eSUN PETG+ is an enhanced version of standard PETG, offering improved mechanical properties such as higher impact resistance and better overall stability. While both are tough and easy to print, PETG+ aims for superior durability and a slightly glossier finish, making it suitable for more demanding applications requiring robust parts.

For eSUN PETG+ filament, a printing speed between 30-60 mm/s is generally effective for balancing speed and print quality. Slower speeds may yield better detail and layer adhesion, especially for intricate parts. Faster speeds can be used for less complex models, but monitor for any signs of under-extrusion or stringing.

Like many filaments, eSUN PETG+ can absorb moisture, which can lead to printing issues like bubbling, stringing, and reduced part strength. It should be stored in a dry, airtight container with desiccant when not in use. If it absorbs moisture, drying it in a filament dryer or oven at 50-60°C for several hours is recommended.