eSUN Bio-Based PLA Resin, Transparent 1kg

For optimal results, an exposure time of 2.5-4 seconds per layer (for 0.05mm layer height) and a bottom exposure time of 30-60 seconds are generally recommended. Always ensure proper bed leveling and a stable ambient temperature between 25-30°C for consistent print quality.

Prints should be cleaned using IPA (isopropyl alcohol) for about 2-5 minutes, ensuring all uncured resin is removed. After drying, post-cure the parts in a UV curing chamber for 2-5 minutes at 395-405nm to achieve maximum mechanical properties and surface hardness.

While eSUN Bio-Based PLA Resin offers good moisture resistance and hardness, it is not specifically designed for prolonged outdoor exposure or high-temperature environments. For parts requiring extreme UV stability or high heat deflection, consider engineering resins explicitly formulated for those conditions.

Always work in a well-ventilated area and wear appropriate personal protective equipment, including nitrile gloves and safety glasses, to prevent skin and eye contact. Avoid direct inhalation of resin vapors. In case of contact, wash thoroughly with soap and water, and seek medical attention if irritation persists.