Bambu Lab PLA Glow Yellow 1.75mm 3D Filament (1kg)

Store in a cool, dry place away from direct sunlight and moisture. The reusable spool helps maintain filament integrity, but using a sealed container with desiccant is recommended to prevent moisture absorption, which can degrade print quality and glow properties over time.

While compatible with 0.4mm, 0.6mm, and 0.8mm nozzles, a 0.6mm or larger nozzle is often preferred for glow-in-the-dark filaments. This helps prevent abrasive luminous particles from clogging smaller nozzles and generally enhances the glow effect due to thicker walls and material deposition.

Optimal print temperature for Bambu Lab PLA Glow typically ranges from 200-220°C, depending on your printer and desired speed. The heated bed should be set between 35-45°C for good adhesion on build plates like the Cool Plate, High-Temp Plate, or Textured PEI.

Yes, Bambu Lab PLA Glow is engineered for high-speed printing, supporting speeds up to 250 mm/s. To achieve optimal results at these speeds, ensure your printer's firmware and hotend can maintain consistent temperatures and flow rates without under-extrusion or stringing.

For maximum glow, expose the printed object to a strong light source, such as UV light or direct sunlight, for a few minutes. Thicker walls and higher infill percentages can also enhance the overall luminous intensity and duration of the glow effect on your finished parts.