Bambu Lab PC Filament - White - 1.75mm

For Bambu Lab PC filament, a nozzle temperature typically ranges from 260-290°C, while the heated bed should be maintained between 90-110°C. An enclosed print chamber is highly recommended to prevent warping and ensure consistent layer adhesion throughout the print. Experiment within these ranges for best results.

Yes, an enclosure is strongly recommended when printing with Bambu Lab PC filament. Polycarbonate materials are prone to warping and delamination due to temperature fluctuations. A stable, warm environment provided by an enclosed printer significantly improves print success rates, layer bonding, and overall part integrity.

Bambu Lab PC generally offers superior mechanical properties compared to ABS, including higher impact strength, greater thermal resistance, and better dimensional stability at elevated temperatures. While ABS is a good general-purpose engineering plastic, PC is preferred for applications requiring more extreme heat and robust mechanical performance.

Bambu Lab PC prints typically do not require specific post-curing. However, if surface finishing is desired, sanding and polishing are possible. For strength, ensure adequate cooling time on the print bed before removal. Prints are largely ready for use directly off the build plate after cooling.