TTP224 4 channel Capacitive touch sensor Module

Flame Sensor Module

Availability 10 in stock 10 in stock

4 Channel Capacitive Touch Module uses the touch-sensing IC TTP224 to sense the touch input. The module has 4 touch pads. Power the module with 2.4 ~ 5.5V DC and the touch pad is all active to sense the input.Four Channel Capacitive Touch Module is easy to interface. It can be used along with a microcontroller or an arduino or even without one. When a capacitive load is in close proximity to the sense-pad, the sensor detects the change in capacitance and activates the switch. Custom sense-pads can be made from nearly any conductive material and these sensors can detect touch through thin layers of non-conductive materials such as glass, plastic, fabric or even wood.

This tiny Flame sensor infrared receiver module ignition source detection module is Arduino compatible can use to detect flame or wavelength of the light source within 760nm~1100nm also useful for Lighter flame detect at the distance 80cm.

Add to cart
Sku - -
Weight 10 g 11 g
Dimensions 35 × 29 mm 32 × 14 mm
Analog Input Pins    
Clock Speed    
Concentration Scope    
DC Current for 3.3V Pin    
DC Current per I/O Pins    
Digital I/O Pins    
Flash Memory    
Heater resistance    
Heating consumption    
Input Voltage    
Input Voltage (limit)    
Load resistance    
Main Chip TTP224 LM393
Operating Current    
Operating Voltage 2.4V-5.5V 3.3V-5V
Output Signal Type    
Preheat Time    
PWM Digital I/O Pins    
Sensing Resistance