PX06 Human Infrared Sensor AC220-240V - 360° Ceiling Mount, Adjustable Delay & Light Sensitivity
PX06 Human Infrared Sensor AC220-240V - 360° Ceiling Mount, Adjustable Delay & Light Sensitivity - Image 2
SKU: SENS-1818
📋 GST Invoice Available

PX06 Human Infrared Sensor AC220-240V - 360° Ceiling Mount, Adjustable Delay & Light Sensitivity

₹509.00 (Inclusive of all taxes)
Out of Stock

The PX06 is a ceiling-mount passive infrared (PIR) motion sensor designed for direct integration into 220-240V AC lighting circuits. It features a 360° detection field, adjustable time delay (6s to 6m), and configurable light sensitivity (2-2000 LUX) for automated lighting control in residential and commercial spaces.

Features

  • Direct 220-240V AC operation for seamless integration into mains-powered lighting systems.
  • 360° panoramic detection with a 6-meter range via a high-sensitivity Fresnel lens.
  • Fully adjustable time delay (6 seconds to 6 minutes) and ambient light sensitivity (2-2000 LUX).
  • Flame-retardant housing ensures safe, durable operation in indoor ceiling installations.
  • Simple two-wire connection and pre-drilled mounting holes for quick, tool-free setup.

Out of stock

Description

The PX06 Human Infrared Sensor operates on the passive infrared (PIR) principle, detecting changes in thermal radiation patterns caused by moving human bodies. It is engineered for direct series connection with 220-240V AC loads, such as incandescent, LED, or fluorescent lighting fixtures, eliminating the need for separate low-voltage power supplies or relay modules.

Its integrated circuitry provides stable signal conditioning, with user-adjustable potentiometers for setting the activation delay after motion ceases and the ambient light threshold at which the sensor becomes active. The flame-retardant plastic housing and 360° rotational mount allow for flexible, secure ceiling installation in corridors, stairwells, warehouses, and storage areas.

Key Features

  • Mains-Powered Convenience: Operates directly on 220-240V AC, simplifying wiring by acting as an automatic switch in the live line.
  • Panoramic Detection Coverage: A single ceiling-mounted unit provides full 360° area monitoring with a 6-meter radial detection distance.
  • User-Configurable Parameters: On-board trim pots allow precise adjustment of time delay (from 6 seconds to 6 minutes) and ambient light activation threshold (2 to 2000 LUX).
  • Robust Safety Construction: Housing manufactured from flame-retardant (UL94 V-0 rated) plastic for enhanced fire safety and long-term reliability.
  • Tool-Free Installation: Features pre-drilled screw holes and a simple two-terminal block (Line In, Load Out) for rapid ceiling mounting and electrical connection.
  • Energy-Saving Automation: Automatically powers down connected loads when no motion is detected, reducing electricity consumption in intermittently occupied spaces.

Applications

  • Automatic lighting control for residential hallways, bathrooms, and closets.
  • Energy management in commercial spaces like office corridors, storage rooms, and warehouse aisles.
  • Security and convenience lighting for stairwells, parking garages, and building entrances.
  • Retail and display lighting automation to activate only when customers are present.

Technical Specifications

Model NumberPX06
Detection PrinciplePassive Infrared (PIR)
Rated Operating VoltageAC 220-240V
Detection Angle360°
Maximum Detection Distance6 meters
Power Consumption (Standby)< 0.5W
Time Delay Adjustment Range6 seconds to 6 minutes
Ambient Light Sensitivity Adjustment2 to 2000 LUX
Housing MaterialFlame-Retardant Plastic
Installation TypeCeiling Mount
Dimensions (Approx.)105mm (Length) x 85mm (Width) x 45mm (Height)
Weight88 grams

Frequently Asked Questions

What is the wiring configuration for the PX06 sensor?

The PX06 is wired in series with the AC mains supply and the load. Connect the AC Line (Live) wire to the sensor's 'L' terminal and connect the sensor's 'Lout' terminal to the live side of the light fixture. The neutral wire runs directly from the supply to the light fixture. Always ensure power is disconnected before installation.

How do I adjust the time delay and light sensitivity settings?

Use a small screwdriver to adjust the two potentiometers located on the bottom of the sensor. One controls the time delay (marked 'TIME'), setting how long the light stays on after motion stops (6s to 6m). The other controls the light sensitivity (marked 'LUX'), setting the ambient light level below which the sensor will activate (2-2000 LUX).

Can this sensor control fluorescent or LED lighting?

Yes, the PX06 is designed to switch standard AC loads, including incandescent, halogen, compact fluorescent (CFL), and most LED lamps. Ensure the total connected load does not exceed the sensor's rated switching capacity (typically 5-10A, check datasheet). For LED loads with low inrush current, performance is optimal.

Is the PX06 suitable for outdoor use?

No, the PX06 is designed for indoor or covered outdoor use (e.g., under a porch). Its housing is flame-retardant but is not rated for water or dust ingress (no IP rating). For fully exposed outdoor locations, a sensor with a proper weatherproof (IP65 or higher) enclosure is required.

Package Includes

  • 1 x PX06 Human Infrared Sensor AC220-240V

Additional Information

Weight 0.088 kg
Dimensions 10.5 × 8.5 × 4.5 cm

Related Products

Image
Out of Stock

Seeed Studio Studio Grove Digital PIR Motion Sensor - 3-5V DC, 100° Angle, Grove Interface

479.00
Learn More
Image
Out of Stock

LSM303DLH GY-51 3-Axis Magnetic Field & Acceleration Module - I2C Interface

449.00
Learn More
Image
Out of Stock

WTMotion HWT9053-485 High-Precision Motion IMU Sensor 200Hz Output - RS485 Interface, IP67 Aluminum Shell

55,649.00
Learn More
Image
Out of Stock

HaiWang HW-MS03 Microwave Radar Motion Sensor Module, 10m Range

229.00
Learn More
Image
Out of Stock

DFRobot Gravity BMI323+BMM350 9DOF IMU Sensor Module (I2C/UART, Plug & Play)

2,309.00
Learn More
Image
Out of Stock

Generic GY-BNO055 9DOF 9-Axis Sensor Module - I2C/Serial Interface

1,709.00
Learn More
Image
Out of Stock

HS-S48-L Gyroscope Module - I2C Interface, PH2.0 3P Terminal

419.00
Learn More
Image
Out of Stock

Arduino Modulino Movement Module ABX00101

1,209.00
Learn More
Image
Out of Stock

PQ06 Human Infrared Sensor AC100-240V - 360° Detection, 6m Range

469.00
Learn More
Image
Out of Stock

Hi-Link HLK-LD2452 24GHz Millimeter-Wave Motion Sensor Module - 5V, 60° Azimuth, ±30° Pitch, 6m Range

839.00
Learn More
Image
Out of Stock

Sonoff PIR2 433MHz Human Motion Sensor for RF Bridge - Wireless Passive Infrared

784.00
Learn More
Image
Out of Stock

Digilent Pmod GYRO 3-Axis Digital Gyroscope Module - SPI/I2C Interface

2,579.00
Learn More