MAD Components Components 4006 EEE 380KV Brushless Motor - Standard Set

The MAD Components 4006 380KV motor is optimized for large, slow-turning propellers in the 13-inch to 16-inch diameter range. Using propellers within this size on a 6S LiPo battery allows the motor to operate efficiently in its high-torque, low-RPM performance envelope, maximizing thrust and flight time while staying within its 17.8A continuous current rating.

No, the 380KV rating and design of the MAD Components 4006 motor are specifically for low-RPM, high-torque applications. It is engineered for heavy-lift, industrial, and long-endurance UAVs, not for high-KV, high-RPM racing setups. For racing, you would typically select a motor with a much higher KV rating (e.g., 1800KV-2600KV) and a smaller physical size (e.g., 2207).

You will need a high-current, low-RPM capable ESC rated for at least 6S (22.2V) operation and a continuous current above 20A per motor. A 30A to 40A BLHeli_S or BLHeli_32 ESC is recommended to provide sufficient headroom for the motor's 17.8A max continuous draw, especially when operating with large propellers under load. Ensure the ESC firmware supports the low timing advance often beneficial for low-KV motors.

Yes, the package includes a propeller plate, an adapter ring, and mounting screws, providing the necessary hardware to securely attach standard large-diameter propellers to the motor's 3.8mm shaft. You will need to supply your own propeller nuts or bolts specific to your chosen propeller's hub size and threading.