MAD Components Components FS 2006 MYTHIC FPV Drone Motor 1960KV - Green
MAD Components Components FS 2006 MYTHIC FPV Drone Motor 1960KV - Green - Image 2
SKU: DRFC-2661
📋 GST Invoice Available

MAD Components Components FS 2006 MYTHIC FPV Drone Motor 1960KV - Green

₹2,329.00 (Inclusive of all taxes)
Out of Stock

The MAD Components Components FS 2006 MYTHIC is a 1960KV brushless motor engineered for 6S FPV freestyle drones, featuring a lightweight titanium shaft and high-efficiency silicon steel laminations for optimized power-to-weight performance.

Features

  • 1960KV rating optimized for 6S LiPo power systems
  • Lightweight titanium shaft for reduced rotational mass
  • High-efficiency 0.15mm silicon steel stator laminations
  • 23A max current and 537W peak power handling
  • 14-pole N52SH neodymium magnet configuration

Out of stock

Description

The MAD Components Components FS 2006 MYTHIC motor is the result of a six-month development cycle focused on refining performance for aggressive freestyle flight. Its core engineering advancements include a precision-machined titanium shaft and ultra-thin silicon steel stator sheets, which collectively reduce eddy current losses and rotational inertia for sharper throttle response and improved efficiency.

Built around a robust 24.3mm diameter stator, the motor delivers 537W of peak power while maintaining a low 80.3mΩ internal resistance for cooler operation. The secondary anodized aluminum housing provides both corrosion resistance and a distinctive aesthetic finish, completing a motor designed for pilots seeking a balance of durability, power, and flight time.

Key Features

  • FS Series Titanium Shaft: Utilizes a lightweight, high-strength titanium shaft (1.5mm diameter) for reduced rotational mass and increased durability.
  • High-Efficiency Stator Design: Incorporates 0.15mm silicon steel laminations to minimize core losses and maximize power conversion efficiency.
  • Optimized Magnetic Circuit: Features a 14-pole N52SH neodymium magnet bell for smooth torque delivery and high power density.
  • Thermal Management: Low internal resistance (80.3mΩ) and efficient design promote cooler operating temperatures under high load.
  • Durable Construction: CNC-machined aluminum alloy housing with secondary anodizing for improved wear resistance and a premium finish.
  • Precision Balanced: Factory dynamic balancing ensures minimal vibration for smooth video footage and reliable bearing life.

Applications

  • 5-inch and 6-inch FPV freestyle quadcopters running on 6S LiPo batteries.
  • High-performance long-range builds requiring efficient cruising and aggressive punch-outs.
  • Heavy-lift Cinewhoop platforms where a balance of torque and high KV is beneficial.
  • FPV racing drones in the 250-350g AUW class where responsive throttle control is critical.

Technical Specifications

Motor ModelFS 2006 MYTHIC
KV Rating1960 KV
Stator Size2006 (20mm x 6mm)
Max Continuous Current23A
Peak Power537W
Internal Resistance80.3 mΩ
Shaft Diameter1.5 mm
Motor Poles14
Outer Diameter24.3 mm
Weight23 g
Recommended Battery6S LiPo
Motor TypeOutrunner Brushless
SeriesFS Series
ColorGreen

Frequently Asked Questions

What is the recommended battery configuration for the MAD Components FS 2006 1960KV motor?

This motor is optimized for 6S LiPo battery systems (22.2V nominal). Its 1960KV rating provides a strong balance of torque and RPM for aggressive freestyle maneuvers on this voltage. While it may operate on lower cell counts, performance will be significantly reduced.

What is the benefit of the titanium shaft in the FS series motor?

The titanium shaft offers a superior strength-to-weight ratio compared to standard steel. This reduces rotational mass, leading to faster throttle response, improved efficiency, and increased durability against bending in crashes. The 1.5mm diameter is a common standard for compatibility with 5-inch propellers.

What propeller size and pitch are suitable for this 2006 1960KV motor?

For 6S operation, common pairings include 5-inch propellers with moderate pitch (e.g., 5x4.3x3) for freestyle, or lighter 5-inch bi-blades for racing. The 23A max current rating suggests avoiding overly aggressive, high-pitch props that could exceed thermal limits during sustained full-throttle flight.

Is this motor pre-installed with a bullet connector or direct solder pads?

Based on its design for high-performance builds, the MAD Components FS 2006 motor typically features direct solder pads for motor wires. This provides the most reliable, low-resistance connection. Pilots should solder motor wires directly to their ESC pads, ensuring proper phase order and secure strain relief.

Package Includes

  • 1 x MAD Components Components FS 2006 MYTHIC FPV Drone Motor (Green, 1960KV)

Additional Information

Weight 0.032 kg
Dimensions 5 × 5 × 4 cm

Related Products

Image
Out of Stock

T-Motor Velox V2306 V2.0 1950KV Brushless Motor - Camo Silver

1,751.00
Learn More
Image
Out of Stock

T-Motor Velox V2207 V3.0 2250KV Brushless Motor - Pink

2,109.00
Learn More
Image
Out of Stock

Flywoo ROBO 1002 23500KV Motor - 1PC

1,449.00
Learn More
Image
Out of Stock

SunnySky Eolo V2 50A Light ESC 4-6S Multirotor

5,189.00
Learn More
Image
Out of Stock

MAD Components Components FS 2004 DYNAMO FPV Drone Motor 2950KV - Red

2,259.00
Learn More
Image
Out of Stock

T-Motor P1604 3.5" Freestyle FPV Motor 2850KV - 4-6S

2,359.00
Learn More
Image
Out of Stock

EMAX ECOII-2004-2400KV Brushless Motor

2,049.00
Learn More
Image
Out of Stock

Quanum 20A Multi-copter Brushless Speed Controller

755.00
Learn More
Image
Out of Stock

CAELUS FA1106 6500KV Brushless Motor

1,319.00
Learn More
Image
Out of Stock

AxisFlying C206 2006 Brushless Motor 1960KV for 3.5-inch 6S Cinewhoop

2,529.00
Learn More
Image
Out of Stock

T-Motor Velox V2208 V2 1750KV Brushless Motor - 4-6S

2,049.00
Learn More
Image
Out of Stock

35A V2.1 2-5S 4-in-1 BLHeli_32 Brushless FPV ESC

2,519.00
Learn More