eSUN PA12+ CF Filament - Black, 1.75mm

To ensure optimal print quality and prevent issues like bubbling or poor layer adhesion, eSUN PA12+ CF should be thoroughly dried before use. We recommend drying the filament at 70-80°C for at least 6-8 hours. A dedicated filament dryer box during printing is highly beneficial for maintaining dryness.

For eSUN PA12+ CF, an extruder temperature between 270-300°C is typically required, depending on your printer and nozzle type. The heatbed temperature should be set between 45-60°C. Using an adhesive like a PEI sheet or glue stick can significantly improve bed adhesion and prevent warping.

The addition of 15% carbon fiber to PA12 nylon dramatically enhances its mechanical properties. It significantly increases the material's tensile strength, flexural strength, and rigidity, while also improving heat resistance and dimensional stability. This makes parts much stronger and more durable for demanding applications.

Yes, using a heated enclosure is highly recommended when printing eSUN PA12+ CF filament. An enclosure helps maintain a stable ambient temperature around the print, reducing thermal stress and minimizing the risk of warping and cracking, especially for larger or more complex parts, despite its low shrinkage properties.

eSUN PA12+ CF is ideal for functional prototypes, jigs, fixtures, and end-use parts in robotics, automotive, and aerospace industries. Its high strength, rigidity, and wear resistance make it perfect for gears, impellers, and precision engineering components that require robust mechanical performance and durability under stress or heat.