eSUN Standard Resin, Beige - 1kg

Optimal exposure times vary by printer and layer height, but a good starting point for eSUN Standard Resin is 2-4 seconds per layer on monochrome LCD printers. Bottom layers typically require longer exposure, around 20-30 seconds, to ensure strong bed adhesion. Always perform a calibration test for best results.

After printing, clean your models thoroughly using high-concentration isopropyl alcohol (IPA) of 95% or higher for approximately 30 seconds. Ensure all uncured resin is removed. Then, post-cure the clean and dry parts under UV light (395-405nm) until fully hardened, typically 2-10 minutes depending on part thickness and UV intensity.

Yes, eSUN Standard Resin is formulated with high rigidity and good mechanical properties, making it suitable for functional prototypes and test parts. While not as tough as engineering resins, it excels in applications requiring dimensional accuracy and moderate strength for fit and function testing.

Store eSUN Standard Resin in its original, opaque bottle in a cool, dry, and well-ventilated area away from direct sunlight and heat sources. Ensure the cap is tightly sealed to prevent light exposure and contamination, which can degrade the resin's quality and shelf life.

While eSUN Standard Resin generally has a low odor, it is still recommended to use it in a well-ventilated space. An enclosed printer can help maintain stable printing temperatures, and proper room ventilation or an air purifier is always advisable to minimize exposure to resin fumes during printing and post-processing.