eSUN Water Washable Resin - Beige 0.5kg

After printing, immerse the model in clean water and gently agitate to remove uncured resin. For optimal results, use an ultrasonic cleaner with water. Ensure all residue is removed before proceeding to post-curing to prevent sticky surfaces.

After thorough washing and drying, expose the print to a 395-405 nm UV light for 1-2 minutes. Over-curing can cause yellowing or brittleness. Ensure all surfaces receive adequate UV exposure for full mechanical property development.

No, it is not recommended to return any resin that has been exposed in the vat back into the original bottle. Contaminated resin can affect the quality and shelf life of the fresh resin. Store used resin in a separate, opaque container away from light.

Yellowing can occur from prolonged UV exposure or high temperature. To mitigate this, avoid over-curing and ensure your curing station isn't excessively hot. For minor yellowing, a brief soak in hot water followed by microwave exposure (30 seconds) can sometimes reduce the discoloration.

Store the resin in its original sealed bottle in a cool, dark, and dry place, away from direct sunlight and high humidity. Keep it at room temperature, ideally between 20-30°C (68-86°F), to maintain its stability and printability.