eSUN eResin-PLA Bio-based LCD 3D Printer Resin 1kg White
This eSUN eResin-PLA is a bio-based photopolymer designed for LCD/LED 3D printers using 405nm light. It offers a balance of strength and detail, making it suitable for a wide range of general-purpose applications.
Features
- Bio-based PLA monomer formulation for general-purpose 3D printing.
- Optimized for 405nm LCD/LED resin 3D printers, ensuring high print quality.
- Achieves 75-80 Shore D hardness with improved strength over standard resins.
- Low viscosity facilitates improved flow and easier post-cleaning of prints.
- Produces highly detailed and scratch-resistant models with minimal warp.
Out of stock
The eSUN eResin-PLA is a specialized bio-based 3D printing resin, formulated with PLA monomers to deliver a unique blend of properties ideal for versatile applications. Engineered specifically for LCD/LED light source 3D printers utilizing a 405 nm wavelength, this resin ensures exceptional printing quality and fast curing speeds. With a robust Shore D hardness of 75-80 and enhanced mechanical strength, it stands out as a superior general-purpose resin for makers and professionals alike.
Printing with eSUN eResin-PLA is streamlined due to its low viscosity, which promotes excellent flow and simplifies the post-processing cleanup of models. Users should shake the bottle well before each use and avoid direct sunlight exposure during printing. For optimal finish and part durability, models require cleaning with high-concentration alcohol (>95%) for approximately 30 seconds after printing.
To maintain peak performance, store the resin away from light, sealed at room temperature, ideally between 15°C and 35°C, in its original container. Always wear gloves to prevent direct skin contact and ensure the printing area is well-ventilated. In case of accidental contact, wash thoroughly with plenty of water and seek medical attention if irritation persists.
Additional Information
| Weight | 1 kg |
|---|---|
| Dimensions | 10 × 27 × 10 cm |
