Bambu Lab PETG Translucent Pink 1.75mm Refill Filament

For optimal print quality and to prevent common issues like stringing and bubbling, it is highly recommended to dry this PETG filament. Use a filament dryer or oven set to 65 °C for a duration of 8 hours before commencing your print. This ensures consistent material flow and dimensional accuracy.

For best results, the extruder temperature should be set between 230–260 °C, while the heatbed temperature should range from 65–75 °C. These parameters help achieve good layer adhesion, minimize warping, and ensure smooth extrusion, contributing to the overall quality of your translucent prints.

The level of translucency can be controlled by adjusting print settings. Experiment with print speed, nozzle temperature, and infill density. Generally, lower speeds, appropriate nozzle temperatures within the recommended range, and specific infill patterns or lower infill percentages can enhance the material's transparent or translucent appearance.

Yes, this PETG filament is exceptionally well-suited for outdoor functional parts. It offers excellent inherent resistance to water, prolonged UV exposure, and temperature variations, making it a reliable choice for components that need to withstand environmental elements without significant degradation or loss of mechanical properties over time.

For strong bed adhesion and successful prints, use a Cool Plate with Super Tack, a Smooth PEI Plate, or a Textured PEI Plate. Bambu Liquid Glue is recommended as an adhesive, especially on smooth surfaces, to ensure parts stick firmly during printing and release cleanly afterward.