Bambu Lab PA6-GF Black 1.75mm Filament (Reusable Spool)

For optimal print quality and mechanical properties, Bambu Lab PA6-GF filament should be thoroughly dried before use. We recommend drying it at 80 °C for a minimum of 8–12 hours. Alternatively, 90–100 °C for 10–12 hours can also be effective. Always store the filament in a sealed container with desiccant to prevent moisture absorption.

For best results with Bambu Lab PA6-GF, set your extruder temperature between 260–290 °C. The heated bed should be maintained at 80–100 °C to ensure proper adhesion and minimize warping. Using a hardened steel nozzle is essential due to the abrasive nature of glass fiber.

To significantly reduce warping when printing with PA6-GF, it is highly recommended to use an enclosed 3D printer. Additionally, applying an adhesive such as glue stick or Magigoo to your build plate (Smooth PEI, Textured PEI, Engineering, or High Temperature Plate) will enhance bed adhesion.

Yes, post-processing can further enhance the properties of PA6-GF prints. It is advisable to remove supports as early as possible after printing. Optional annealing at 80–130 °C can be performed on printed parts to further boost their mechanical strength and heat resistance for specific applications.