Generic 2 Inch Electronic Turbine Flow Meter High Precision Portable Industrial Flow Sensor Stainless Steel

The provided specifications indicate a digital display and user interface, but do not specify an external power requirement or electronic output signal (e.g., 4-20mA, pulse, RS485). It is designed as a portable, standalone meter with an integrated display. For integration with a PLC or DAQ system, verify the presence of output terminals or consult the manufacturer's datasheet for signal options.

Calibration is achieved by adjusting the measuring coefficient via the two-button interface. You must first determine the meter's K-factor (pulses per unit volume) for your specific fluid under controlled flow conditions. Enter this value into the meter's settings to ensure accurate readings. The meter supports coefficient adjustment for media like diesel, water, and methanol.

This flow meter is rated for a maximum working pressure of 0.6 MPa (approximately 87 psi) and an operating temperature range of -25°C to +70°C. Ensure your system's operating conditions stay within these limits to prevent damage to the internal turbine mechanism and electronics and to maintain specified accuracy.

The primary wetted materials are stainless steel and aluminum alloy, which offer good resistance to many common industrial liquids like diesel, kerosene, methanol, and water. However, for highly corrosive or abrasive chemicals, the compatibility of these materials should be verified. The sensor is not specifically rated for aggressive acids, caustics, or slurries.