iFlight XING2 2207 Unibell FPV Motor - 1855KV

Name: iFlight XING2 2207 Unibell FPV Motor - 1855KV
Brand: iFlight
SKU: DRFC-2617
Price: 2939.00 INR
Availability: OutOfStock

₹2,939.00 (Inclusive of all taxes)

Out of Stock

The iFlight XING2 2207 1855KV brushless motor is engineered for high-performance 5-inch FPV freestyle and racing drones, featuring a 5mm titanium alloy shaft, a crash-resistant 7075 aluminum unibell, and center-slotted N52H curved arc magnets for ultra-low latency response and high power efficiency on 4S-6S LiPo systems.

Features

5mm Titanium Alloy Shaft for maximum strength and crash resistance.
Crash-Resistant 7075 Aluminum Unibell Construction for enhanced durability.
Center-Slotted N52H Curved Arc Magnets for drastically reduced motor response time.
High-Quality NSK 9x4x4 Bearings ensure smooth, long-lasting operation.
Optimized for 4S-6S LiPo systems, delivering 841.9W peak power for aggressive 5-inch FPV builds.

Out of stock

Get Notified When Available

Description

The XING2 series represents a significant evolution in iFlight’s motor design, focusing on translating flight controller commands into physical movement with minimal delay. The introduction of center-slotted N52H curved arc magnets directly addresses the bottleneck of motor acceleration and braking latency, providing pilots with a more locked-in and responsive flight feel essential for precise freestyle maneuvers and competitive racing.

Beyond responsiveness, the motor’s construction prioritizes durability and efficiency. The 7075 aluminum unibell and robust 5mm titanium shaft are designed to withstand high-impact crashes. Furthermore, the minimized magnet air gap and stator lamination reduce magnetic reluctance, increasing magnetic flux for greater power output and electrical efficiency, allowing for longer flight times and cooler operating temperatures under heavy load.

Key Features

Ultra-Low Latency Design: Center-slotted N52H curved arc magnets drastically reduce motor response time for a locked-in flight feel.
Premium Crash Durability: 5mm titanium alloy shaft and 7075 aluminum unibell provide exceptional impact resistance.
High-Efficiency Magnetic Circuit: Minimized air gap between magnets and stator increases magnetic flux for more power and efficiency.
Professional-Grade Bearings: NSK 9x4x4 bearings ensure smooth rotation and extended service life.
Integrated Protection: Features an O-ring for bearing gap sealing and a motor wire protector to prevent damage during installation.
Dynamic Balancing: Each motor is dynamically balanced for minimal vibration and smooth performance.
Single-Strand Copper Windings: Optimized winding pattern for a high power-to-weight ratio and thermal performance.

Applications

5-inch FPV Freestyle Drones requiring high torque and rapid throttle response for complex tricks.
5-inch FPV Racing Drones where minimal motor latency and high peak power are critical for competitive lap times.
High-Performance 5-inch Long-Range or Cinematic builds that benefit from the motor's efficiency and durability.
Aggressive 6S-powered 5-inch quadcopters demanding robust construction and maximum power output.

Technical Specifications

Motor Model	XING2 2207
KV Rating	1855 KV
Stator Size	22mm x 7mm
Shaft Diameter	5mm Titanium Alloy
Shaft Length	13.5 mm
Maximum Voltage	24V (6S LiPo)
Peak Current	35.08 A
Peak Power	841.9 W
Mounting Pattern	16x16 mm (M3 holes)
Bearing Type	NSK 9x4x4
Motor Weight	31.6 g
Winding Type	Single Strand Copper

Frequently Asked Questions

What is the benefit of the center-slotted N52H magnets in the XING2 motor?

The center-slotted N52H curved arc magnets are designed to drastically reduce the motor's magnetic reluctance and inductance. This results in a significantly faster electrical and mechanical response time, meaning the motor accelerates and decelerates more quickly. This translates directly to a more locked-in flight feel, as the quadcopter responds more precisely to pilot inputs and PID controller commands.

What size propellers and battery voltage is this 1855KV motor suitable for?

The iFlight XING2 2207 1855KV motor is optimally paired with 5-inch propellers (such as 5040, 5045, or 5145) and is designed for 4S to 6S LiPo battery systems. On 6S, it delivers very high power and is best suited for aggressive freestyle or racing. For a more efficient, longer-flight-time setup on a 5-inch quad, using it with a 4S battery is also a common and effective configuration.

What is the mounting hole pattern and what hardware is included?

This motor uses the standard 16x16mm M3 mounting pattern common to most 5-inch FPV drone frames. The package includes four M3 x 7mm screws and an M5 flange nut for securing the propeller. Ensure your flight stack or frame uses a 30.5x30.5mm or 25.5x25.5mm pattern to be compatible with the 16mm motor mounting holes.