HGLRC AEOLUS 1404 3600KV Brushless Motor

This motor requires an Electronic Speed Controller (ESC) rated for a continuous current of at least 25A. For optimal performance and headroom, especially on 6S voltage, pairing it with a high-quality 30A-35A 4-in-1 ESC or individual ESCs is advised to handle peak current draws during aggressive maneuvers.

The motor is optimized for 2-inch to 4-inch propellers. For 4S operation, 3-inch bi-blade or tri-blade props are typical. On 6S, smaller, less aggressive-pitch 2-inch or 2.5-inch props are recommended to keep current draw within safe limits while maximizing thrust efficiency.

While technically possible, using this 3600KV motor on 3S will significantly reduce its RPM and thrust output, negating its performance advantages. It is specifically wound for a 4S to 6S voltage range (14.8V-25.2V) to achieve its rated power and responsiveness.

The provided specifications indicate a motor body diameter of Φ19.5mm. For precise mounting, you should verify the specific bolt pattern for your frame, but 1404 motors commonly use a 9mm x 9mm or 12mm x 12mm mounting pattern with M2 screws. Always confirm with the motor's physical inspection or official documentation.