SKU: DRFC-2282
📋 GST Invoice Available

IDC-681H 25mW 40CH VTX 600TVL M7 FPV Camera

₹1,969.00 (Inclusive of all taxes)
Out of Stock

The IDC-681H is a compact, integrated 600TVL FPV camera and 25mW video transmitter designed for 1S-powered micro and nano drone builds, offering 40 channels across standard and race bands for plug-and-play installation.

Features

  • Integrated 600TVL M7 CMOS camera with 25mW VTX for ultra-compact builds.
  • Operates on 1S LiPo power (3.7V), ensuring low power consumption.
  • 40-channel 5.8GHz transmitter supports standard bands and Raceband (5658-5917MHz).
  • Super lightweight and miniature form factor for micro racers and DIY drones.
  • Plug-and-play design simplifies wiring and integration into small-scale frames.

Out of stock

Description

The IDC-681H combines a 600TVL CMOS camera with a low-power 25mW video transmitter in a single, miniaturized unit. Its integrated design eliminates separate wiring between camera and VTX, significantly reducing weight and complexity for micro-class drones. The system is engineered for reliability on 1S voltage systems, providing stable video feed with minimal electrical noise.

Built around an M7 sensor, the camera delivers a sharp, low-latency analog video signal suitable for FPV racing and freestyle in confined spaces. The VTX section covers a broad 5.8GHz spectrum, including the dedicated Raceband, allowing for flexible channel selection in group flying environments. Its all-in-one construction prioritizes space-saving installation without sacrificing core FPV functionality.

Key Features

  • All-in-one 600TVL camera and 25mW 5.8GHz VTX eliminates separate modules and wiring.
  • Optimized for 1S LiPo operation (3.7V) with efficient power regulation for extended flight times.
  • Full 40-channel capability including Raceband (R1-R8) for competitive and crowded FPV environments.
  • Ultra-lightweight and compact footprint designed specifically for micro and nano drone frames.
  • M7 CMOS sensor provides a good balance of light sensitivity and latency for dynamic flying.
  • Plug-and-play connectivity with a single power lead, simplifying build and maintenance.

Applications

  • Ultra-lightweight 1S-powered micro and nano FPV racing drones (e.g., 65mm-75mm whoops).
  • DIY micro freestyle and park flyer builds requiring a compact, integrated video solution.
  • Tiny whoop (Toothpick) class drones where minimizing weight and component count is critical.
  • Indoor and backyard FPV flying with low-power VTX for minimal interference.
  • Educational or beginner drone builds seeking a simple, plug-and-play camera/VTX system.

Technical Specifications

Item TypeFPV Camera & VTX Combo
Camera Resolution600TVL
Camera SensorM7 CMOS
Video Transmitter Power25mW
Frequency Range5.8GHz
Channel Support40 Channels
Supported BandsIncludes Raceband (R1-R8)
Raceband Frequency5658-5917MHz
Input Voltage1S LiPo (3.7V)
Shipping Weight0.012 kg
Shipping Dimensions6 x 6 x 2 cm

Frequently Asked Questions

What is the input voltage for the IDC-681H camera/VTX combo?

The IDC-681H is designed to operate on a 1S LiPo battery, which provides a nominal voltage of 3.7V. It is not recommended to use higher voltage sources (2S or more) as this will damage the integrated electronics. Ensure your drone's power system is configured for 1S output.

Does this camera support Raceband for FPV racing?

Yes, the integrated 5.8GHz video transmitter supports 40 channels, which includes the full Raceband (R1 through R8). This allows you to select clear channels in organized racing events and crowded flying environments where standard bands may be congested.

Is this unit suitable for a 2-inch or larger freestyle drone?

While functional, the IDC-681H is specifically optimized for ultra-lightweight, 1S-powered micro and nano drones (typically under 75mm). For larger 2-inch or 3-inch drones running on 2S-4S, a camera and VTX with higher voltage tolerance and potentially more output power would be a more robust and suitable choice.

Package Includes

  • 1 x IDC-681H 25mW 40CH VTX 600TVL M7 FPV Camera

Additional Information

Weight 0.012 kg
Dimensions 6 × 6 × 2 cm