SWYAM WiFi IoT Smart Pump Controller 5HP Single-Phase w/ App

Download the SWYAM Smart Home App from your phone's app store. Power on the controller and ensure it's in pairing mode (Wi-Fi LED blinking). Follow the in-app setup wizard, which will guide you through selecting your local 2.4GHz Wi-Fi network and entering the password. The controller will connect and appear as a device in the app, ready for remote control and scheduling. The process typically takes under two minutes.

The controller uses standard magnetic float sensors (often included or available separately). Typically, two sensors are used: one for the 'low' level in the source tank and one for the 'high' level in the destination tank. They connect to the dedicated sensor terminals on the controller using low-voltage wiring. The magnetic reed switch inside each sensor opens or closes the circuit, signaling the controller to turn the pump ON or OFF automatically based on the programmed logic.

Yes, the controller features a physical manual override switch on the unit itself. This allows you to turn the pump ON or OFF locally without relying on the Wi-Fi connection or the smartphone app. The manual mode operates independently of the automatic sensor logic, providing a reliable fallback for essential operation during network outages or maintenance periods.

This SWYAM controller is rated for single-phase AC motors up to 5 Horsepower (HP) with a maximum continuous current of 30 Amperes at 220-250 Volts AC. It is suitable for common residential and commercial monoblock, submersible, or centrifugal pumps. Always verify your pump's nameplate specifications for voltage, phase, and horsepower rating before installation to ensure compatibility and safe operation.