SUNLU PA (Nylon) Like Resin - White, 1kg Bottle

After printing, clean models thoroughly with isopropyl alcohol (IPA) or ethanol for about 2-5 minutes, preferably using an ultrasonic cleaner. Ensure all uncured resin is removed before proceeding to post-curing for optimal strength and surface finish.

SUNLU PA Like Resin is specifically formulated to offer enhanced mechanical properties, mimicking the toughness and flexibility of Nylon. It exhibits higher tensile strength, flexural strength, and elongation at break compared to standard resins, making it suitable for more demanding applications requiring robust parts.

Optimal exposure settings vary by printer and layer height. Generally, bottom layer exposure times range from 20-60 seconds (5-8 layers), with normal layer exposure between 2.0-4.0 seconds. It's recommended to perform calibration tests (like a R_E_R_F test) for your specific machine to fine-tune.

While not strictly mandatory for all environments, maintaining a stable room temperature between 20-30°C is crucial for best results. A heated enclosure isn't typically required for SUNLU PA Like Resin, but avoiding drafts and significant temperature fluctuations will help ensure consistent print quality and reduce potential warping.

It is generally not recommended to mix SUNLU PA Like Resin with other resin types, especially from different brands or with different chemical compositions. Such mixing can lead to unpredictable curing behavior, compromised mechanical properties, and potential printing failures. For best results, use the resin as supplied.