SUNLU PLA+ 2.0 Beige 1.75mm 1kg 3D Printer Filament

For best results with SUNLU PLA+ 2.0, a nozzle temperature between 205–245°C is recommended, with a heated bed set to 50–60°C. These settings ensure strong layer adhesion and minimize warping, optimizing both print quality and mechanical properties.

While PLA+ is less hygroscopic than some other materials, proper drying enhances print quality. For optimal performance, dry SUNLU PLA+ at 50-55°C for 4-6 hours, especially if it has been exposed to high humidity. This prevents stringing and ensures smooth extrusion.

SUNLU PLA+ 2.0 features an enhanced formula providing significantly improved mechanical properties over standard PLA. It boasts a higher tensile strength of 46 MPa and better impact resistance (10 kJ/m²), making printed parts more durable and suitable for functional applications requiring greater robustness.

Good bed adhesion is crucial for successful prints. For SUNLU PLA+ 2.0, a heated bed at 50-60°C is generally sufficient. For added security, especially on smooth surfaces like glass, consider using a thin layer of glue stick, blue painter's tape, or a PEI sheet.

Yes, SUNLU PLA+ 2.0 is formulated to support modern high-speed 3D printers, with a maximum printing speed of up to 300 mm/s. Achieving these speeds requires a well-tuned printer, sufficient hot-end flow, and optimized cooling to maintain print quality.