SunLu ABS Like Resin, Clear, 1kg

After printing and cleaning with IPA, post-curing is essential to achieve optimal mechanical properties. Expose the part to 365-405nm UV light for 30-60 minutes, rotating as needed to ensure even curing. This process maximizes hardness and strength, providing the best possible end-part performance.

Store the resin in its original sealed bottle, away from direct sunlight and heat. A cool, dry, and well-ventilated environment at room temperature (10-30°C) is ideal. Always shake the bottle well for at least 30 seconds before each use to ensure homogeneity and consistent print quality.

Exposure times vary by printer model and screen type. For 405nm LCD/DLP printers, typical layer exposure ranges from 2.0-4.0 seconds for normal layers and 25-40 seconds for bottom layers. Always perform calibration tests, such as an R_E_R_F test, to find the optimal settings for your specific machine.

While SUNLU ABS Like Resin offers enhanced durability, like most photopolymer resins, it may degrade with prolonged exposure to direct sunlight and harsh outdoor elements over time. For best longevity in outdoor scenarios, apply a UV-resistant clear coat or paint to protect the printed part surface.

ABS-Like resins provide significantly improved toughness, impact resistance, and elongation at break compared to standard resins. This makes them suitable for functional prototypes, snap-fit assemblies, and parts requiring more mechanical resilience and less brittleness, closely mimicking traditional ABS plastic properties.