Pro-Range TPU 95A Filament 1.75mm 1kg Fire Engine Red

To minimize stringing and oozing, ensure your filament is dry and experiment with retraction settings. Increase retraction distance slightly (e.g., 4-6mm) and retraction speed (e.g., 30-50mm/s). Calibrate flow rate and ensure print temperature is not excessively high, typically within the 210-230°C range for optimal results.

For optimal bed adhesion, use a heated print bed typically between 40-60°C. Applying an adhesive such as a glue stick or PEI sheet can greatly improve first layer stick. Ensure proper bed leveling and a slow, compressed first layer for maximum contact and to prevent parts from detaching during printing.

While not always strictly necessary, an enclosure can significantly improve print quality with TPU 95A, especially for larger parts. It helps maintain a stable ambient temperature, reducing potential warping and improving layer adhesion, although TPU is less prone to warping than materials like ABS. Consider it for consistent, high-quality outcomes.

TPU is hygroscopic, meaning it absorbs moisture from the air. Store Pro-Range TPU 95A in a dry, airtight container with desiccant packs when not in use. If moisture absorption is suspected, dry the filament in a dedicated filament dryer or oven at around 50-60°C for 4-6 hours before printing to restore optimal performance.