Pro-Range TPU 95A Filament 1.75mm Purple 1kg

For Pro-Range TPU 95A, print with an extrusion temperature between 210-230°C and a print speed of 40-80 mm/s. A heated bed at 40-60°C is recommended for optimal adhesion. Adjust settings based on your printer and specific part geometry to achieve the best results and prevent stringing.

To minimize stringing and oozing, ensure your filament is dry and experiment with retraction settings. Increase retraction distance and speed slightly, but avoid excessively high values which can cause clogs. Lowering print temperature within the recommended range can also help, as can reducing print speed.

Yes, TPU is highly hygroscopic and should be dried before printing to prevent common issues like bubbling, poor layer adhesion, and stringing. We recommend drying at 50-60°C for at least 4-6 hours in a filament dryer or a convection oven to ensure optimal print quality and mechanical properties.

For excellent bed adhesion, use a heated print bed set to 40-60°C. Applying an adhesive like a glue stick, Kapton tape, or a dedicated build plate adhesive designed for flexible materials can significantly improve the first layer bond. Ensure your bed is properly leveled and clean for consistent results.