Pro-Range TPU 95A Filament 1.75mm 1kg White Spool

For best results, print between 210-230°C with a heated bed at 40-60°C. A slow print speed of 40-80 mm/s is recommended to manage flexibility and prevent stringing. Ensure your printer has a direct drive extruder for optimal TPU handling to prevent jamming and ensure consistent flow.

To minimize stringing, optimize your retraction settings. Start with a higher retraction distance and speed, then fine-tune. Lowering the print temperature slightly within the recommended range can also help. Ensure your filament is dry, as moisture significantly exacerbates oozing issues with flexible materials like TPU.

While not strictly mandatory for TPU 95A, using an enclosure can help maintain a stable ambient temperature around your print, improving layer adhesion and reducing the risk of warping, especially for larger models. It also helps with print consistency by minimizing drafts, leading to better overall print quality.

TPU is hygroscopic, meaning it readily absorbs moisture from the air. Store your filament in an airtight container with desiccant packets immediately after opening and between prints. Properly drying the filament in a dedicated dryer at 50-60°C for 4-6 hours before printing is crucial for preventing print defects.