Pro-Range PVA Filament 1.75mm 0.5kg, Natural
Pro-Range PVA Filament 1.75mm 0.5kg, Natural - Image 2
SKU: 3DMR-1003
📋 GST Invoice Available

Pro-Range PVA Filament 1.75mm 0.5kg, Natural

₹2,029.00 (Inclusive of all taxes)
Out of Stock

Pro-Range PVA filament is a premium, water-soluble support material designed for dual-extrusion 3D printing. It dissolves easily in room-temperature water, enabling the production of complex models with intricate overhangs and internal structures.

Features

  • Water-soluble support material ideal for complex geometries and overhangs.
  • High compatibility, pairing excellently with PLA, PETG, and other common filaments.
  • Ensures smooth extrusion and clog-free printing for reliable performance.
  • Fully dissolves in water without residue, simplifying post-processing.
  • Biodegradable and eco-friendly choice for sustainable 3D printing.

Out of stock

Description

The Pro-Range PVA Filament offers a premium water-soluble solution for intricate 3D printing challenges. Engineered for dual-extrusion FDM printers, this 1.75mm natural PVA filament excels as a sacrificial support material. It allows for the effortless creation of models featuring complex overhangs, internal voids, and intricate geometries that would otherwise be difficult or impossible to produce without damaging the primary print.

Designed for optimal compatibility, Pro-Range PVA adheres securely to primary printing materials like PLA and PETG, ensuring robust multi-material prints. Its reliable extrusion characteristics minimize clogging, leading to consistent and high-quality print outcomes. Once printing is complete, simply submerge the part in room-temperature water; the PVA will dissolve completely, leaving behind a clean, residue-free final product. Due to its hygroscopic nature, proper storage in a dry, sealed environment is crucial to maintain filament integrity and ensure consistent performance.

Key Features

  • Water-Soluble Support Material: Specifically designed for creating temporary support structures that can be easily removed by dissolving in water.
  • High Compatibility: Forms strong bonds with common print materials such as PLA, PETG, and other FDM filaments.
  • Clean Dissolution: Dissolves completely in room-temperature water, leaving no residue or marks on the final printed part.
  • Smooth Extrusion: Engineered for stable and consistent filament flow, minimizing the risk of clogs and print failures.
  • Eco-Friendly: Composed of biodegradable, non-toxic polymer, ensuring an environmentally responsible printing process.
  • Optimal Print Precision: Facilitates the printing of intricate model detailing and complex geometries with enhanced accuracy.
  • Moisture Sensitive: Comes in vacuum-sealed packaging with desiccant to prevent moisture absorption prior to use.
  • Reliable Adhesion: Provides secure bonding to both print surfaces and adjacent primary print materials.

Applications

  • Functional prototypes requiring complex internal support structures or intricate overhangs.
  • Complex engineering models where clean support removal is critical for dimensional accuracy.
  • Architectural models or artistic designs with extreme bridges and delicate features.
  • Multi-material prints where a soluble interface layer is necessary between different materials.
  • Lost-wax casting molds (after dissolution, leaves an empty cavity).

Technical Specifications

MaterialPVA
Filament Diameter1.75mm
Density1.23 g/cm³
Heat Distortion Temp45–50°C
Melt Flow Index8.5 g/10min @ 190°C
Elongation at Break15%
Tensile Strength (MPa)20–30
Flexural Strength35–50 MPa
Flexural Modulus1000–1500 MPa
Extruder Temperature190–210°C
Heatbed Temperature45–60°C (optional)
Spool Width65 mm
Spool Outer Dia208 mm
Printing Speed20–40 mm/s
ColorNature

Frequently Asked Questions

How should I store PVA filament to maintain its quality?

PVA filament is highly hygroscopic and absorbs moisture from the air quickly. To ensure optimal print quality and prevent issues like bubbling, poor adhesion, and nozzle clogs, it is crucial to store your PVA filament in a dry, airtight container with desiccant immediately after use.

What are the recommended print settings for Pro-Range PVA filament?

For optimal results with Pro-Range PVA, an extruder temperature between 190-210°C is recommended. An optional heated bed temperature of 45-60°C can improve adhesion. It's best to keep print speeds relatively low, typically in the range of 20-40 mm/s, adjusting for your specific printer and primary material.

How do I dissolve PVA support structures after printing?

PVA supports are easily removed by submerging the printed part in room-temperature water. Ensure adequate water circulation around the part. While warm water (not hot) can accelerate the dissolution process, avoid excessively hot water. Agitation can also help speed up the complete removal of the support material.

Which primary printing materials are compatible with PVA for dual extrusion?

Pro-Range PVA is engineered for excellent compatibility with a variety of common FDM printing materials. It forms strong layer adhesion with popular filaments such as PLA and PETG, making it an ideal choice for dual-extrusion setups where a soluble support is required without compromising print integrity.

Package Includes

  • 1x Pro-Range PVA Filament (1.75mm, 0.5kg, Natural)

Additional Information

Weight 1.35 kg
Dimensions 21 × 21 × 7 cm

Related Products

Image
Out of Stock

Bambu Lab PETG-CF Brick Red 1.75mm Reusable Spool Filament

1,899.00
Learn More
Image
Out of Stock

Bambu Lab PLA Lite 1.75mm Filament - Red

1,149.00
Learn More
Image
Out of Stock

Bambu Lab PLA Lite Blue 1.75mm Refill Filament

1,149.00
Learn More
Image
Out of Stock

Bambu Lab PLA Lite Filament 1.75mm - Green (Reusable Spool)

999.00
Learn More
Image
Out of Stock

Bambu Lab PETG-CF 1.75mm Filament - Black (Reusable Spool)

1,899.00
Learn More
Image
Out of Stock

Creality Ender-5 Max nozzle

39.00
Learn More
Image
Out of Stock

Bambu Lab PLA Lite Green 1.75mm Refill Filament

999.00
Learn More
Image
Out of Stock

Bambu Lab PLA Lite White 1.75mm Filament Reusable Spool

1,149.00
Learn More
Image
Out of Stock

Bambu Lab PLA Lite Cyan 1.75mm Filament (Reusable Spool)

1,149.00
Learn More
Image
Out of Stock

Bambu Lab PETG Translucent Purple 1.75mm Refill

1,149.00
Learn More
Image
Out of Stock

Creality Activated Carbon Air Filter

419.00
Learn More
Image
Out of Stock

Bambu Lab PLA Basic Multi-Color 1.75mm Filament Pack

5,599.00
Learn More