Wireless and IOT
Showing all 14 results
-
Wireless and IOT
ESP 12F Esp8266 Wi-Fi Module Ap and Station Remote Serial Wireless Iot Board
The Latest ESP-12F ESP8266 Wifi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks
It is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with full TCP/IP stack and MCU (Micro Controller Unit) capability
ESP8266 Serial Wifi Wireless Transceiver Module is a self-contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. ESP8266 Serial Wifi Wireless Transceiver Module is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.SKU: OL510078 -
Bluetooth Module
ESP32 ESP-32 ESP-32S ESP 32 Development Board CP2102 WiFi Bluetooth Ultra-Low Power Consumption Dual Core
Bluetooth ModuleESP32 ESP-32 ESP-32S ESP 32 Development Board CP2102 WiFi Bluetooth Ultra-Low Power Consumption Dual Core
ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management module. The entire solution takes up the least amount of printed circuit board area. This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology, power and RF properties best, which is safe, and scalable to a variety of applications. FEATURES: High performance, easily embeded to other products Strong function with support LWIP protocol. Supporting three modes: AP, STA, and AP+STA Supporting Lua program, easily to develop.
SKU: OL510077 -
IOT Development Board
Esp8266-01 Serial WIFI Wireless Transceiver Module
This is a ESP8266 based wifi modile. The ESP 01 ESP8266 Serial WIFI Wireless Transceiver Module is a self-contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.
SKU: 510003 -
IOT Development Board
Esp8266-12E WIFI Module
This is ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino. This small WIFI transceiver is the perfect solution for home Automation and IoT applications. It can be the replacement of your NRF24L01, it can talk to your WIFI router directly through the UART MCU’s (Rx, Tx).
SKU: 510002 -
GPS Module and Boards
GPS NEO-6M Module
This is the u-blox NEO-6M global positioning system (GPS) module, a very popular, cost-effective, high-performance GPS module with a ceramic patch antenna, an on-board memory chip, and a backup battery that can be conveniently integrated with a broad range of microcontrollers.
SKU: 530001 -
Bluetooth Module
HC-05 – Bluetooth Module
HC-05 6 Pin Wireless Serial Bluetooth Module is a Bluetooth module for use with any microcontroller. It uses the UART protocol to make it easy to send and receive data wirelessly. The HC-05 is a very cool module which can add two-way (full-duplex) wireless functionality to your projects. You can use this module to communicate between two microcontrollers like Arduino or communicate with any device with Bluetooth functionality like a Phone or Laptop. There are many android applications that are already available which makes this process a lot easier. The module communicates with the help of USART at 9600 baud rate hence it is easy to interface with any microcontroller that supports USART.
SKU: 520001 -
RFID Modules and Accessories
MFRC-522 RC522 RFID Module
The RC522 is a 13.56MHz RFID module that is based on the MFRC522 controller from NXP semiconductors. The module can supports I2C, SPI and UART and normally is shipped with a RFID card and key fob. It is commonly used in attendance systems and other person/object identification applications. The MFRC522 reader supports ISO/IEC 14443 A/MIFARE mode. The MFRC522’s internal transmitter is able to drive a reader or writer antenna designed to communicate with ISO/IEC 14443 A/MIFARE cards and transponders without additional active circuitry. The receiver module provides a robust and efficient implementation for demodulating and decoding signals from ISO/IEC 14443 A/MIFARE compatible cards and transponders. The digital module manages the complete ISO/IEC 14443 A framing and error detection (parity and CRC) functionality.
SKU: 550001 -
IOT Development Board
NodeMcu ESP8266 Based Wireless Development Module for IOT
The nodemcu is an open-source firmware and development kit that helps you to prototype your iot product within a few lua script lines or ‘c’ codes. Nodemcu it is like arduino hardware with a input output built in the board itself, it has also a wifi built in to connect directly to internet to control your things online using nodejs style network api for digital network applications, which facilitates developers to code running on the board, greatly speed up your internet of things application development process.
SKU: 510001 -
RF Module
RF Wireless Transmitter Receiver Module (Green)
This RF module comprises an RF Transmitter and an RF Receiver. The transmitter/receiver (Tx/Rx) pair operates at a frequency of 433 MHz. An RF transmitter receives serial data and transmits it wirelessly through RF through its antenna connected at pin4. The transmission occurs at the rate of 1Kbps – 10Kbps. The transmitted data is received by an RF receiver operating at the same frequency as that of the transmitter.
SKU: 560001 -
RF Module
RF Wireless Transmitter Receiver Module (Red)
This is an ask hybrid transmitter receiver module available at 433 and 315 mhz. The transmitter module employs a crystal-stabilized oscillator, ensuring accurate frequency control for best range performance. There is no requirement of external rf components except antenna. Rf transmitter features output power: 4-16dbm circuit shape: Saw rf receiver features receiver frequency: 433.92 typical sensitivity: -105dbm supply current: 3.5ma infrequency: 1mhz operation voltage: 5 volts ideal for remote control applications where longer range is required. The transmitter operates from a 3-12v supply, making it ideal for battery-powered applications. Easy for application rx operating voltage: 5v tx frequency range: 433.92 mhz tx supply voltage: 3v – 6v tx out put power: 4 – 12 dbm.
SKU: 560002 -
RFID Modules and Accessories
RFID Card for Smart Access Control
RFID Card used for Contactless transmission of data and supplies energy with no battery needed. Its Operating distance is Up to 100mm depending on antenna geometry. It is featured with Data integrity of 16 Bit CRC, parity, bit coding bit counting which allows Anti collision. These cards are typically used in ticketing transaction: <100 ms including backup management.
SKU: 550002 -
GSM Modules and Boards
SIM800L GPRS GSM Module
This is Small SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-band TTL Serial Port with the antenna, in this module two antennas have been included. SIM800L GSM/GPRS module is a miniature GSM modem, which can be integrated into a great number of IoT projects. You can use this module to accomplish almost anything a normal cell phone can; SMS text messages, make or receive phone calls, connecting to the internet through GPRS, TCP/IP, and more! To top it off, the module supports quad-band GSM/GPRS network, meaning it works pretty much anywhere in the world
SKU: 540001 -
GSM Modules and Boards
Sim900A GSM Modem Module
The SIM900A is a readily available GSM/GPRS module,used in many mobile phones and PDA. The module can also be used for developing IOT (Internet of Things) and Embedded Applications. SIM900A is a dual-band GSM/GPRS engine that works on frequencies EGSM 900MHz and DCS 1800MHz. SIM900A features GPRS multi-slot class 10/ class 8 (optional) and supports the GPRS coding schemes CS-1, CS-2, CS-3 and CS-4.
SKU: 540002 -
