Driver IC
Showing all 3 results
-
Driver IC
L293D Motor Driver IC
L293D PowerDIP-16 Stepper Motor Controller/ Driver is a dual H-bridge motor driver integrated circuit (IC). Motor drivers act as current amplifiers since they take a low-current control signal and provide a higher-current signal. This higher current signal is used to drive the motors.
SKU: 130003 -
Driver IC
MAX232 IC
The MAX-232 IC is an integrated circuit which consists of 16 pins and it is a resourceful IC mostly used in the voltage level signal problems. Generally, the MAX-232 IC is used in the RS232 communication system for the conversion of voltage levels on TTL devices that are interfaced with the PC serial port and the Microcontroller. This IC is used as a hardware layer converter like to communicate two systems simultaneously.
SKU: 130001 -
Driver IC
ULN2003 Stepper Motor Driver IC
ULN2003 IC is one of the most commonly used Motor driver IC. This IC comes in handy when we need to drive high current loads using digital logic circuits like Op-maps, Timers, Gates, Arduino, PIC, ARM etc. For example a motor that requires 9V and 300mA to run cannot be powered by an Arduino I/O hence we use this IC to source enough current and voltage for the load. This IC is commonly used to drive Relay modules, Motors, high current LEDs and even Stepper Motors. So if you have anything that anything more than 5V 80mA to work, then this IC would be the right choice for you.
SKU: 130025