Driver & Converter Module
Showing all 5 results
-
Driver & Converter Module
L293D Motor Driver Board
The L293D motor driver is available for providing User with ease and user friendly interfacing for embedded application. L293D motor driver is mounted on a good quality, single sided non-PTH PCB. The pins of L293D motor driver IC are connected to connectors for easy access to the driver IC’s pin functions. The L293D is a Dual Full Bridge driver that can drive up to 1Amp per bridge with supply voltage up to 24V. Compatible with arduino, raspberry pi, arm, avr, pic, 8051, etc.
SKU: 230001 -
Arduino and Accessories, Driver & Converter Module, Shields
L293D Motor Driver Shield Expansion Board
Arduino and Accessories, Driver & Converter Module, ShieldsL293D Motor Driver Shield Expansion Board
It has 2 connections for 5v hobby servos connected to the arduino’s high-resolution dedicated timer. Its 4 h-bridges and l293d chipset provide 0. 6a per bridge. It comes with thermal shutdown protection and internal kickback protection diodes. It can run motors on 4. 5vdc to 25vdc. It provides up to 4 bi-directional dc motors with individual 8-bit speed selection with single coil, double coil or interleaved stepping. The pull-down resistors keep motors disabled during power-up. It has big terminal block connectors to easily hook up wires and power arduino reset button brought up top 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies. This is tested and compatible with arduino mega 1280 and 2560, diecimila, duemilanove, and uno.
SKU: 210011 -
Arduino and Accessories, Driver & Converter Module
L298N stepper motor driver board
This module USES L298N as the main drive chip, with strong driving ability, low heat and strong anti-interference ability. Through this module can use the built-in 78 m05 drive power supply parts of their work, but in order to avoid the voltage regulator chip damage, when using the driving voltage is greater than 12 v, please use the external power supply 5 v logic.
SKU: 210012 -
Driver & Converter Module
USB to RS232 TTL Converter Module Adapter Board
The USB to RS232 module based TTL provides the best and convenient way to connect your RS232 TTL Devices or demo board to your PC or Microcontroller via the USB port. This compact USB-UART module, leads to the interface, including 5V, 3.3V, TXD, RXD, GND, TXD, RXD which can be directly Connect the MCU serial port.
SKU: 230003