Boards & Modules
Showing 1–15 of 85 results
-
-
Display Module
16×2 Yellow or Green Backlight Alphanumeric Character LCD Display
A 16×2 Character LCD display means it can display 16 characters per line and there are 2 such lines. In this LCD each character is displayed in 5×7 pixel matrix. This is great yellow backlight LCD display. It is fantastic for Arduino based project. This LCD1602 Parallel LCD Display with Yellow Backlight is very easy to interface with Arduino or Other Microcontrollers.
SKU: 220001 -
Display Module
4 Bits Digital Tube LED Display Module With Clock Display
The TM1637 4 Bits Digital Tube LED Display Module is an affordable solution for displaying the output data of your Arduino project. Though the data displayed is restricted by numbers still it allows users to display some characters too like A, B, C etc. This 7 segment LED Display has 4 digits which are controlled by TM1637 Driver Chip. It requires only two connections to control this TM1637 4 Bits Digital Tube LED Display Module.
SKU: 220002 -
Display Module
7 Segment LED Display
This is a basic, 7-segment display – red in color. It has a common anode. The display features one decimal point per digit and individually controllable apostrophe and colon points.The LEDs have a forward voltage of 3VDC and a max forward current of 20mA.
SKU: 220006 -
Display Module
8 * 8 Mini Dot Matrix Led Display
RGB LED dot-matrix driver compatible with Arduino. Colorduino pairs the M54564 with a single DM163 constant current driver. By using the DM163, Colorduino gains three 8+6-bit channels of hardware PWM control of the LED’s freeing up the MCU from having to implement it in software. This gives the ATmega328 more CPU bandwidth for performing other tasks.
SKU: 220007 -
-
Accelerator/Gyroscope/Magnetometer Module
ADXL345 3-Axis Accelerometer Gravity Module
The ADXL345 is a low-power, 3-axis MEMS accelerometer modules with both I2C and SPI interfaces. The Adafruit Breakout boards for these modules feature on-board 3.3v voltage regulation and level shifting which makes them simple to interface with 5v microcontrollers such as the Arduino. The ADXL345 features 4 sensitivity ranges from +/- 2G to +/- 16G. And it supports output data rates ranging from 10Hz to 3200Hz.
SKU: 260026 -
Arduino and Accessories
Arduino ATMEGA328P Pro Mini 328 of 3.3V/8MH, 5V/16MHz
The Pro Mini is a microcontroller board base on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable to provide USB power and communication to the board. The Pro Mini Arduino is intended for semi-permanent installation in objects or exhibitions. The pin layout is compatible with the Mini Arduino.
SKU: 210004 -
Arduino and Accessories
Arduino MEGA2560 Development Board
The ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board is a micro-controller board base on the ATmega2560. It has a USB host interface to connect with Android based phones, base on the MAX3421e IC. It has 54 digital input/output pins (of which 15 can be used as PWM outputs); 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator; a USB connection, a power jack, an ICSP header, and a reset button. The MEGA ADK is base on the Mega 2560.
SKU: 210003 -
Arduino and Accessories
Arduino Nano V3 ATmega328P Development Board
Arduino Nano version 3 development board is small in size but very powerful complete board based on Atmel’s ATmega328 microcontroller. It has almost the same capability of the Arduino Duemilanove. The only drawback of this board is it has a Mini-B USB cable connection to power the board. So it does not support standard USB cable like A/B. The Arduino board is designed in such a way that it is very easy for beginners to get started with microcontrollers. This board especially is breadboard friendly is very easy to handle the connections. Let’s start with powering the Board.
SKU: 210002 -
Arduino and Accessories, DIY Electronic Kits
Arduino UNO based Professional Electronics Starter DIY Kit – V1
Arduino and Accessories, DIY Electronic KitsArduino UNO based Professional Electronics Starter DIY Kit – V1
A professional arduino uno based electronics and robotics DIY kit with UNO R3, USB Cable, LEDs, Buzzer, Switch, Breadboard, Servo SG90 Motor, Bluetooth HC05 Module, PIR Motion Sensor, Ultrasonic Sensor, LCD 16×2, 4×4 Keypad, IR sensors, Relay board, L293D Motor Driver Board, ESP 8266 01 Wifi Board, Male and Female Header Strips and Jumper Wires.
SKU: 110006
